Lotus Brushed Gunmetal 3-Spoke Forged Wheels
Monoblock · Brushed Gunmetal
2023 Lotus Eletre Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lotus Eletre wheels? This page gives the 2023 Lotus Eletre bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Lotus Eletre rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2023 Lotus Eletre uses a 5x120 bolt pattern with a 63.3 mm centre bore and M12x1.5 lug bolts. For aftermarket wheels, 23x9.5J ET40 front / 23x11J ET35 rear sits flush.
Forged wheels for the 2023 Lotus Eletre — drilled 5x120 with a 63.3 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lotus Eletre (2023): 5x120 bolt pattern, 63.3mm center bore, OE F 22x9J ET33 / R 22x10.5J ET40. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120
Wheel Bolt/NutM12x1.5 Bolt
Center Bore63.3mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2023
Category5-Lug Large Sedan/SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 23x9.5J ET40 / R 23x11J ET35 |
Forged Wheel Designs for the Lotus Eletre
Every design below is forged to order, so it can be machined to the Lotus Eletre's 5x120 bolt pattern and 63.3 mm center bore, with the width and offset calculated for your setup.
Lotus OEM-Style Gloss Black 10 Split-Spoke Forged Wheels
Monoblock · Gloss Black
APEX SM-10-Style Matte Gold 10-Spoke Forged Wheels
Replica · Matte Gold
APEX EC-7-Style Chrome Silver 10-Spoke Forged Wheels
Replica · Chrome Silver
Lotus OEM-Style Black / Machined Face Forged Wheels
Monoblock · Black Machined
Lotus OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Advan-Style Satin Black 6-Spoke Forged Wheels
Monoblock · Satin Black
Black / Machined 10-Spoke Lettered-Ring Beadlock Forged Wheels
Off-Road Beadlock · Custom Finish
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Lotus Eletre ships from the factory on a 5x120 bolt pattern with a 63.3mm center bore and a F 22x9J ET33 / R 22x10.5J ET40 wheel. Our flush reference for the Lotus Eletre is F 23x9.5J ET40 / R 23x11J ET35.; our maximum aggressive reference is F 23x10J ET35 / R 23x11.5J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Lotus Eletre OE Wheel Specs
The Lotus Eletre ships from the factory on 5x120 bolt pattern wheels with a 63.3mm center bore. The stock wheel size is F 22x9J ET33 / R 22x10.5J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lotus Eletre (2023) we drill the 5x120 pattern and cut the centre bore to 63.3mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 22x9J | ET33 | 6.30 in (160 mm) | — | — |
| Flush | 23x9.5J | ET40 | 6.82 in (173 mm) | +13 mm | −1 mm |
| Maximum | 23x10J | ET35 | 6.88 in (175 mm) | +15 mm | +11 mm |
Vehicles With the Same Hub as the Lotus Eletre (5x120, 63.3 mm Bore)
In our database, 1 other Lotus entries use exactly the same 5x120 bolt pattern and 63.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 0.3% of those also use a 63.3 mm center bore.
Hub-Centric Rings for a 63.3 mm Center Bore
A wheel with a center bore larger than 63.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 63.3 mm |
| 64.1 mm | 64.1 → 63.3 mm |
| 65.1 mm | 65.1 → 63.3 mm |
| 66.1 mm | 66.1 → 63.3 mm |
| 73.1 mm | 73.1 → 63.3 mm |
ANKUSI forged wheels are bored to exactly 63.3 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Lotus Eletre use?
The 2023 Lotus Eletre uses a 5x120 bolt pattern.
How many lug bolts does the Lotus Eletre use?
The Lotus Eletre uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lotus Eletre?
The Lotus Eletre's center bore is 63.3mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Lotus Eletre?
For a flush look with minimal to no rubbing, we recommend F 23x9.5J ET40 / R 23x11J ET35 as a starting point on a stock or mildly lowered Lotus Eletre.
Do I need wheel spacers for my Lotus Eletre?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lotus Eletre?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.82" backspacing up front and 7.38" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lotus Eletre?
Yes — the Lotus Eletre's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x9 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.