OZ Racing-Style Polished Turbofan Dish Riveted Lip Forged Wheels
2-Piece · Polished
2026 Kia EV9 GT Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Kia EV9 GT wheels? This page gives the 2026 Kia EV9 GT bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia EV9 GT rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 Kia EV9 GT uses a 5x114.3 bolt pattern with a 67.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: 22x9.0J, front and rear. For aftermarket wheels, 22x10.0J ET35 sits flush and 23x10.5J ET30 is the most aggressive fit.
Forged wheels for the 2026 Kia EV9 GT — drilled 5x114.3 with a 67.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Kia EV9 GT (2026): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 22x9.0J F/R. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM14x1.5 Nut
Center Bore67.1mm
Wheel Load Rating1035–1438 kg/wheel (SUV segment reference)
Year2026
CategoryEV SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x9.0J F/R |
| Flush Fitment | 22x10.0J at ET35 offset |
| Maximum Aggressive | 23x10.5J at ET30 offset |
Forged Wheel Designs for the Kia EV9 GT
Every design below is forged to order, so it can be machined to the Kia EV9 GT's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.
Kia OEM-Style Gloss Black Multi-Spoke Turbine Forged Wheels
Monoblock · Gloss Black
Vossen LC3-01T-Style Brushed Silver 5-Spoke Forged Wheels
Replica · Brushed Silver
Satin Gunmetal 5-Spoke Forged Wheels
Monoblock · Satin Gunmetal
EvoCorse-Style Satin Black 12-Spoke Rally Forged Wheels
Monoblock · Satin Black
Vossen-Style Bright Silver Y-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Kia EV9 GT's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Kia EV9 GT runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 22x9.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 22x10.0J ET35, which tucks the tire under the fender lip on a stock-height Kia EV9 GT. Our Maximum Aggressive reference is 23x10.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Kia EV9 GT OE Wheel Specs
The 2026 Kia EV9 GT (EV SUV) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 22x9.0J F/R.
Why the factory spec works for most owners:
- Preserves the factory-tuned ride and steering feel
- A mainstream size for this segment, keeping tire choice wide and prices reasonable
- Leaves full clearance for the stock brakes and suspension hardware
- Keeps handling predictable and consistent in everyday conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia EV9 GT (2026) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 22x9.0J ET45 → ~6.77″ backspacing
- Flush: 22x10.0J ET35 → ~6.88″ backspacing
- Max: 23x10.5J ET30 → ~6.93″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia EV9 GT? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Kia EV9 GT (5x114.3, 67.1 mm Bore)
In our database, 456 other vehicle entries from 30 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Kia EV9 GT use?
The 2026 Kia EV9 GT uses a 5x114.3 bolt pattern.
How many lug bolts does the Kia EV9 GT use?
The Kia EV9 GT uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Kia EV9 GT?
The Kia EV9 GT's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Kia EV9 GT?
Factory wheels on the Kia EV9 GT are 22x9.0J F/R.
What is the biggest wheel size I can fit on my Kia EV9 GT without rubbing?
The most aggressive fitment we recommend without fender work is 23x10.5J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Kia EV9 GT?
For a flush look with minimal to no rubbing, we recommend 22x10.0J at ET35 offset as a starting point on a stock or mildly lowered Kia EV9 GT.
Do I need wheel spacers for my Kia EV9 GT?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Kia EV9 GT?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Kia EV9 GT?
The Kia EV9 GT runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x9 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.