
Hongqi OEM-Style Gunmetal Machined Twin 10-Spoke Forged Wheels
Monoblock · Gunmetal
Fitting Hongqi HS5 wheels? This page gives the 2019 Hongqi HS5 bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Hongqi HS5 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Hongqi HS5 (2019): 5x114.3 bolt pattern, 67.1mm center bore. Factory tire size: 235/60R18. Aftermarket sizes confirmed on request.
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Every design below is forged to order, so it can be machined to the Hongqi HS5's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.

Monoblock · Gunmetal

Monoblock · Bright Silver

Monoblock · Matte Silver

Replica · Gloss Black

Monoblock · Bronze

Replica · Gloss Black

Monoblock · Black / White

Monoblock · Gloss Black
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


The 2019 Hongqi HS5 (SUV) uses a 5x114.3 bolt pattern with a 67.1mm center bore. The factory tire size is 235/60R18.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Hongqi HS5 (2019) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
We are still verifying real-world Flush and Maximum Aggressive reference fitments for this exact generation from owner communities, so we are not publishing offset ranges yet rather than guessing. Contact ANKUSI now with your target look and tire size and we will confirm a custom-offset forged wheel build for your Hongqi HS5 directly.
What bolt pattern (PCD) does the Hongqi HS5 use?
The 2019 Hongqi HS5 uses a 5x114.3 bolt pattern.
What is the center bore size on the Hongqi HS5?
The center bore is 67.1mm. If an aftermarket wheel has a larger center bore, hub-centric rings are recommended.
What size are the factory wheels on the Hongqi HS5?
The factory tire size is 235/60R18.
Can I get a custom offset before your Flush/Max data is published?
Yes -- contact ANKUSI with your bolt pattern and target offset and we will confirm the correct forged wheel spec for your build now.