CCW-Style Gloss Black Mesh 2-Piece Polished Lip Off-Road Forged Wheels
Off-Road · Gloss Black / Polished Lip
2024 Ford F-150 Tremor Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ford F-150 Tremor wheels? This page gives the 2024 Ford F-150 Tremor bolt pattern (6x135), centre bore, factory rim size and the offset range for aftermarket and forged Ford F-150 Tremor rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Ford F-150 Tremor (2024): 6x135 bolt pattern, 87.1mm center bore. Factory wheels: 18x7.5J F/R. Reference fitment ranges.
Bolt Pattern6x135
Wheel Bolt/NutM14x2 Nut
Center Bore87.1mm
Wheel Load Rating1000–1400 kg/wheel (Pickup / Light Truck segment reference)
Year2024
CategoryPickup
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.5J F/R |
| Flush Fitment | 20x9.0J at ET20 offset |
| Maximum Aggressive | 20x10.0J at ET12 offset |
Forged Wheel Designs for the Ford F-150 Tremor
Every design below is forged to order, so it can be machined to the Ford F-150 Tremor's 6x135 bolt pattern and 87.1 mm center bore, with the width and offset calculated for your setup.
Gloss Black Mesh 2-Piece Deep Lip Forged Wheels
Off-Road · Gloss Black
Forgiato Multi-Spoke 2-Piece Forged Wheels
Off-Road · Brushed
MMX Design Polished 5-Spoke Forged Wheels
H-Type · Polished
Gloss Black / Machined Directional 5-Spoke Deep Dish 2-Piece Forged Wheels
Off-Road · Gloss Black / Machined
DT Forge Pink & Chrome Multi-Spoke Wheels
H-Type · Pink / Chrome
American Force Polished Multi-Spoke Wheels
H-Type · Polished
See all Ford F-150 wheel designs Ford OEM-Style Forged Wheels Black Mud-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Trucks live and die on unsprung weight and load capacity — every pound added at the wheel is a pound the suspension has to control over every bump, fully loaded or not. Forging the wheel instead of casting it lets us hold the factory load rating while cutting rotational mass, which pays off directly in ride quality and steering response on a vehicle that spends real time towing or hauling.
The Ford F-150 Tremor runs a 6x135 bolt pattern, 87.1mm center bore, and a 18x7.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9.0J ET20, which tucks the tire under the fender lip on a stock-height Ford F-150 Tremor. Our Maximum Aggressive reference is 20x10.0J ET12 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Ford F-150 Tremor OE Wheel Specs
The 2024 Ford F-150 Tremor (Pickup) uses a 6x135 bolt pattern with a 87.1mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford F-150 Tremor (2024) we drill the 6x135 pattern and cut the centre bore to 87.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x7.5J ET44 → ~5.98″ backspacing
- Flush: 20x9.0J ET20 → ~5.79″ backspacing
- Max: 20x10.0J ET12 → ~5.97″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Ford spec, or want a wheel built to a custom offset for your Ford F-150 Tremor? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Ford F-150 Tremor use?
The 2024 Ford F-150 Tremor uses a 6x135 bolt pattern.
How many lug bolts does the Ford F-150 Tremor use?
The Ford F-150 Tremor uses a 6-lug bolt pattern (6x135), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Ford F-150 Tremor?
The Ford F-150 Tremor's center bore is 87.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ford F-150 Tremor?
Factory wheels on the Ford F-150 Tremor are 18x7.5J F/R.
What is the biggest wheel size I can fit on my Ford F-150 Tremor without rubbing?
The most aggressive fitment we recommend without fender work is 20x10.0J at ET12 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Ford F-150 Tremor?
For a flush look with minimal to no rubbing, we recommend 20x9.0J at ET20 offset as a starting point on a stock or mildly lowered Ford F-150 Tremor.
Do I need wheel spacers for my Ford F-150 Tremor?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ford F-150 Tremor?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.79" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ford F-150 Tremor?
The Ford F-150 Tremor runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x2.0, conical-seat lug nut.
Factory Torque Spec: 200 Nm (150 ft-lb). F-150 spec on M14x2.0 studs; confirm the exact figure for your specific model year, since Ford has revised this across generations.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.