Weld Racing-Style 10 Y-Spoke Polished / Gold Forged Drag Racing Wheels
Drag Racing · Polished / Gold
2004 Ford F-150 SVT Lightning Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ford F-150 SVT Lightning wheels? This page gives the 2004 Ford F-150 SVT Lightning bolt pattern (5x135), centre bore, factory rim size and the offset range for aftermarket and forged Ford F-150 SVT Lightning rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2004 Ford F-150 SVT Lightning uses a 5x135 bolt pattern with a 87.1 mm centre bore and M14x2 lug nuts. Factory wheels: 18x9.5J ET14. For aftermarket wheels, 20x10J ET15 sits flush.
Forged wheels for the 2004 Ford F-150 SVT Lightning — drilled 5x135 with a 87.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Ford F-150 SVT Lightning (2004): 5x135 bolt pattern, 87.1mm center bore, OE 18x9.5J ET14. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x135
Wheel Bolt/NutM14x2 Nut
Center Bore87.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2004
Category5-Lug Standard Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x9.5J ET14 |
| Flush Fitment | 20x10J at ET15 offset |
Forged Wheel Designs for the Ford F-150 SVT Lightning
Every design below is forged to order, so it can be machined to the Ford F-150 SVT Lightning's 5x135 bolt pattern and 87.1 mm center bore, with the width and offset calculated for your setup.
Weld Racing-Style Black / Milled 10-Window Polished-Lip Forged Drag Racing Wheels
Drag Racing · Polished
Ford Mustang OEM-Style Gloss Black Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Gloss Black
Ford Mustang OEM-Style Light Gunmetal 5 Y-Spoke Forged Wheels
Monoblock · Light Gunmetal
Gloss Black 5-Spoke Polished Lip Forged Wheels
Monoblock · Gloss Black
Brushed Silver 10-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Brushed Silver
Mirror Polished Swirl Smoothie Forged Wheels
Monoblock · Chrome
Vossen Gloss Black 10 Y-Spoke Forged Wheels
Replica · Gloss Black
See all Ford F-150 wheel designs Ford OEM-Style Forged Wheels Black Mud-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Ford F-150 SVT Lightning ships from the factory on a 5x135 bolt pattern with a 87.1mm center bore and a 18x9.5J ET14 wheel. Our flush reference for the Ford F-150 SVT Lightning is 20x10J ET15.; our maximum aggressive reference is 22x10.5J ET10. — beyond that, expect clearance issues against the fender liner without further modification.
Ford F-150 SVT Lightning OE Wheel Specs
The Ford F-150 SVT Lightning ships from the factory on 5x135 bolt pattern wheels with a 87.1mm center bore. The stock wheel size is 18x9.5J ET14, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford F-150 SVT Lightning (2004) we drill the 5x135 pattern and cut the centre bore to 87.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x9.5J | ET14 | 5.80 in (147 mm) | — | — |
| Flush | 20x10J | ET15 | 6.09 in (155 mm) | +7 mm | +5 mm |
| Maximum | 22x10.5J | ET10 | 6.14 in (156 mm) | +9 mm | +17 mm |
Vehicles With the Same Hub as the Ford F-150 SVT Lightning (5x135, 87.1 mm Bore)
No other make in our database pairs 5x135 with a 87.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x135 is used by <0.1% of the vehicle pages in our English fitment guide (1 of 6,503); 100.0% of those also use a 87.1 mm center bore.
Hub-Centric Rings for a 87.1 mm Center Bore
A wheel with a center bore larger than 87.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 93.1 mm | 93.1 → 87.1 mm |
| 100.1 mm | 100.1 → 87.1 mm |
| 106.1 mm | 106.1 → 87.1 mm |
| 108.1 mm | 108.1 → 87.1 mm |
ANKUSI forged wheels are bored to exactly 87.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Ford F-150 SVT Lightning use?
The 2004 Ford F-150 SVT Lightning uses a 5x135 bolt pattern.
How many lug bolts does the Ford F-150 SVT Lightning use?
The Ford F-150 SVT Lightning uses a 5-lug bolt pattern (5x135), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Ford F-150 SVT Lightning?
The Ford F-150 SVT Lightning's center bore is 87.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ford F-150 SVT Lightning?
Factory wheels on the Ford F-150 SVT Lightning are 18x9.5J ET14.
What does a flush wheel fitment look like on the Ford F-150 SVT Lightning?
For a flush look with minimal to no rubbing, we recommend 20x10J at ET15 offset as a starting point on a stock or mildly lowered Ford F-150 SVT Lightning.
Do I need wheel spacers for my Ford F-150 SVT Lightning?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ford F-150 SVT Lightning?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.09" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ford F-150 SVT Lightning?
The Ford F-150 SVT Lightning runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x9.5 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.