APEX-Style Bright Silver 8 Twin-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
2017 Fiat Fiorino Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Fiat Fiorino wheels? This page gives the 2017 Fiat Fiorino bolt pattern (4x98), centre bore, factory rim size and the offset range for aftermarket and forged Fiat Fiorino rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2017 Fiat Fiorino uses a 4x98 bolt pattern with a 58.1 mm centre bore and M12x1.25 lug bolts. Factory wheels: 15x6.0J, front and rear. For aftermarket wheels, 16x7.0J ET35 sits flush and 17x7.5J ET30 is the most aggressive fit.
Forged wheels for the 2017 Fiat Fiorino — drilled 4x98 with a 58.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Fiat Fiorino (2017): 4x98 bolt pattern, 58.1mm center bore. Factory wheels: 15x6.0J F/R. Reference fitment ranges.
Bolt Pattern4x98
Wheel Bolt/NutM12x1.25 Bolt
Center Bore58.1mm
Wheel Load Rating900–1100 kg/wheel (Van / MPV segment reference)
Year2017
CategoryVan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 15x6.0J F/R |
| Flush Fitment | 16x7.0J at ET35 offset |
| Maximum Aggressive | 17x7.5J at ET30 offset |
Forged Wheel Designs for the Fiat Fiorino
Every design below is forged to order, so it can be machined to the Fiat Fiorino's 4x98 bolt pattern and 58.1 mm center bore, with the width and offset calculated for your setup.
Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
Black / Machined 4-Spoke Forged Wheels
Monoblock · Black Machined
Alfa Romeo OEM-Style Matte Silver 5-Spoke Forged Wheels
Monoblock · Matte Silver
Silver Round-Hole Steelie-Style Forged Wheels
Monoblock · Silver
APEX-Style Matte Bronze 8 Y-Spoke Mesh Forged Wheels
Monoblock · Matte Bronze
Bronze Gold Cross-Spoke Forged Wheels
Monoblock · Bronze Gold
OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Monoblock · Gloss White
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A minivan's wheel spec has to work across a wide load range — empty commute or full family trip. Forged construction preserves the factory's load-rating margin while cutting rotational weight, which keeps ride quality consistent across that range.
The Fiat Fiorino runs a 4x98 bolt pattern, 58.1mm center bore, and a 15x6.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 16x7.0J ET35, which tucks the tire under the fender lip on a stock-height Fiat Fiorino. Our Maximum Aggressive reference is 17x7.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Fiat Fiorino OE Wheel Specs
The 2017 Fiat Fiorino (Van) uses a 4x98 bolt pattern with a 58.1mm center bore. Factory wheels are 15x6.0J F/R.
Why the factory spec works for most owners:
- Keeps the factory ride quality and noise levels intact
- A common fitment for this class, so replacement tires are easy to source
- Preserves clearance around the OE brakes and suspension geometry
- Delivers predictable, easy-to-live-with handling for daily use
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Fiat Fiorino (2017) we drill the 4x98 pattern and cut the centre bore to 58.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 15x6.0J ET40 → ~5.07″ backspacing
- Flush: 16x7.0J ET35 → ~5.38″ backspacing
- Max: 17x7.5J ET30 → ~5.43″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Fiat spec, or want a wheel built to a custom offset for your Fiat Fiorino? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Fiat Fiorino (4x98, 58.1 mm Bore)
In our database, 53 other vehicle entries from 9 makes use exactly the same 4x98 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x98 is used by 1.1% of the vehicle pages in our English fitment guide (74 of 6,503); 73.0% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Fiat Fiorino use?
The 2017 Fiat Fiorino uses a 4x98 bolt pattern.
How many lug bolts does the Fiat Fiorino use?
The Fiat Fiorino uses a 4-lug bolt pattern (4x98), so you need a 4-lug forged wheel to bolt straight on.
What is the center bore size on the Fiat Fiorino?
The Fiat Fiorino's center bore is 58.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Fiat Fiorino?
Factory wheels on the Fiat Fiorino are 15x6.0J F/R.
What is the biggest wheel size I can fit on my Fiat Fiorino without rubbing?
The most aggressive fitment we recommend without fender work is 17x7.5J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Fiat Fiorino?
For a flush look with minimal to no rubbing, we recommend 16x7.0J at ET35 offset as a starting point on a stock or mildly lowered Fiat Fiorino.
Do I need wheel spacers for my Fiat Fiorino?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Fiat Fiorino?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.38" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Fiat Fiorino?
The Fiat Fiorino runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 15x6 wheels · 15 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.