Weld Racing-Style Gloss Black / Machined 5-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
2004 Dodge Caravan SXT Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Dodge Caravan SXT wheels? This page gives the 2004 Dodge Caravan SXT bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Dodge Caravan SXT rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Dodge Caravan SXT (2004): 5x114.3 bolt pattern, 71.5mm center bore. Factory wheels: 16x6.5J at ET40 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore71.5mm
Wheel Load Rating900–1100 kg/wheel (Van / MPV segment reference)
Year2004
CategoryMinivan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x6.5J F/R |
| Flush Fitment | 17x7.5J at ET38 offset |
| Maximum Aggressive | 18x8.0J at ET35 offset |
Forged Wheel Designs for the Dodge Caravan SXT
Every design below is forged to order, so it can be machined to the Dodge Caravan SXT's 5x114.3 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Gloss Black Machined 10-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
Dodge OEM-Style 2-Piece Gloss Black Y-Spoke Riveted Lip Forged Wheels
2-Piece · Gloss Black
Dodge OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Boyd Racing-Style Gloss Black / Mirror Milled 5-Spoke Forged Wheels
Monoblock · Gloss Black / Mirror Milled
Weld Racing-Style Mirror Milled 10-Spoke Polished Deep Lip Forged Drag Racing Wheels
Drag Racing · Mirror Milled
Belak-Style Gloss Black / Machined 5 Split-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
Weld Racing-Style Gloss Black / Mirror Milled Multi-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Mirror Milled
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A minivan's wheel spec has to work across a wide load range — empty commute or full family trip. Forged construction preserves the factory's load-rating margin while cutting rotational weight, which keeps ride quality consistent across that range.
The Dodge Caravan SXT runs a 5x114.3 bolt pattern, 71.5mm center bore, and a 16x6.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x7.5J ET38, which tucks the tire under the fender lip on a stock-height Dodge Caravan SXT. Our Maximum Aggressive reference is 18x8.0J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Dodge Caravan SXT OE Wheel Specs
The 2004 Dodge Caravan SXT (Minivan) uses a 5x114.3 bolt pattern with a 71.5mm center bore. Factory wheels are 16x6.5J F/R.
Why the factory spec works for most owners:
- Supports passenger and cargo load capacity
- Balances ride comfort with everyday practicality
- A widely used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Dodge Caravan SXT (2004) we drill the 5x114.3 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 16x6.5J ET40 → ~5.32″ backspacing
- Flush: 17x7.5J ET38 → ~5.75″ backspacing
- Max: 18x8.0J ET35 → ~5.88″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Dodge spec, or want a wheel built to a custom offset for your Dodge Caravan SXT? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Dodge Caravan SXT use?
The 2004 Dodge Caravan SXT uses a 5x114.3 bolt pattern.
How many lug bolts does the Dodge Caravan SXT use?
The Dodge Caravan SXT uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Dodge Caravan SXT?
The Dodge Caravan SXT's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Dodge Caravan SXT?
Factory wheels on the Dodge Caravan SXT are 16x6.5J F/R.
What is the biggest wheel size I can fit on my Dodge Caravan SXT without rubbing?
The most aggressive fitment we recommend without fender work is 18x8.0J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Dodge Caravan SXT?
For a flush look with minimal to no rubbing, we recommend 17x7.5J at ET38 offset as a starting point on a stock or mildly lowered Dodge Caravan SXT.
Do I need wheel spacers for my Dodge Caravan SXT?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Dodge Caravan SXT?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.75" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Dodge Caravan SXT?
The Dodge Caravan SXT runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.