Holden OEM-Style Chrome 5-Spoke Forged Wheels
Monoblock · Chrome
2006 Holden Captiva MaXX Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Holden Captiva MaXX wheels? This page gives the 2006 Holden Captiva MaXX bolt pattern (5x115), centre bore, factory rim size and the offset range for aftermarket and forged Holden Captiva MaXX rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006 Holden Captiva MaXX uses a 5x115 bolt pattern with a 70.3 mm centre bore and M12x1.5 lug nuts. Factory wheels: 18x7J ET45. For aftermarket wheels, 19x8J ET35 sits flush.
Forged wheels for the 2006 Holden Captiva MaXX — drilled 5x115 with a 70.3 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Holden Captiva MaXX (2006): 5x115 bolt pattern, 70.3mm center bore, OE 18x7J ET45. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x115
Wheel Bolt/NutM12x1.5 Nut
Center Bore70.3mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2006
Category5-Lug Large Sedan/SUV
Data check: published sources disagree on part of this vehicle's hub data, and we are reviewing it. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7J ET45 |
| Flush Fitment | 19x8J at ET35 offset |
Forged Wheel Designs for the Holden Captiva MaXX
Every design below is forged to order, so it can be machined to the Holden Captiva MaXX's 5x115 bolt pattern and 70.3 mm center bore, with the width and offset calculated for your setup.
Holden OEM-Style Chrome 6-Spoke Forged Wheels
Monoblock · Chrome
Polished Silver Split 10-Spoke Deep Lip 2-Piece Forged Wheels
2-Piece · Polished Silver
Gloss Black Double-Ring Red Lip Carbon Fibre Forged Wheels
Carbon Fiber · Gloss Black
Black / Machined 10-Spoke Side-Milled Mirror Milled Forged Wheels
Off-Road Beadlock · Black Machined
Belak-Style Purple / Gloss Black Multi-Spoke Beadlock Forged Drag Racing Wheels
Drag Racing · Purple / Gloss Black
Gloss Black / Mirror Milled 5-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black / Mirror Milled
Matte Bronze 10-Spoke Forged Wheels
Monoblock · Matte Bronze
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Holden Captiva MaXX ships from the factory on a 5x115 bolt pattern with a 70.3mm center bore and a 18x7J ET45 wheel. Our flush reference for the Holden Captiva MaXX is 19x8J ET35.; our maximum aggressive reference is 20x8.5J ET32. — beyond that, expect clearance issues against the fender liner without further modification.
Holden Captiva MaXX OE Wheel Specs
The Holden Captiva MaXX ships from the factory on 5x115 bolt pattern wheels with a 70.3mm center bore. The stock wheel size is 18x7J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Holden Captiva MaXX (2006) we drill the 5x115 pattern and cut the centre bore to 70.3mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7J | ET45 | 5.77 in (147 mm) | — | — |
| Flush | 19x8J | ET35 | 5.88 in (149 mm) | +3 mm | +23 mm |
| Maximum | 20x8.5J | ET32 | 6.01 in (153 mm) | +6 mm | +32 mm |
Vehicles With the Same Hub as the Holden Captiva MaXX (5x115, 70.3 mm Bore)
In our database, 135 other vehicle entries from 9 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Holden Captiva MaXX use?
The 2006 Holden Captiva MaXX uses a 5x115 bolt pattern.
How many lug bolts does the Holden Captiva MaXX use?
The Holden Captiva MaXX uses a 5-lug bolt pattern (5x115), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Holden Captiva MaXX?
The Holden Captiva MaXX's center bore is 70.3mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Holden Captiva MaXX?
Factory wheels on the Holden Captiva MaXX are 18x7J ET45.
What does a flush wheel fitment look like on the Holden Captiva MaXX?
For a flush look with minimal to no rubbing, we recommend 19x8J at ET35 offset as a starting point on a stock or mildly lowered Holden Captiva MaXX.
Do I need wheel spacers for my Holden Captiva MaXX?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Holden Captiva MaXX?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.88" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Holden Captiva MaXX?
The Holden Captiva MaXX runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x7 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.