Geely Xingrui L Plus Forged Wheels
Monoblock
2027 Geely Galaxy Starshine 7 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Geely Galaxy Starshine 7 wheels? This page gives the 2027 Geely Galaxy Starshine 7 bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Geely Galaxy Starshine 7 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2027 Geely Galaxy Starshine 7 uses a 5x114.3 bolt pattern with a 63.4 mm centre bore and M12x1.5 lug nuts. Factory wheels: 19x7.5J ET45. For aftermarket wheels, 20x8.5J ET38 sits flush.
Forged wheels for the 2027 Geely Galaxy Starshine 7 — drilled 5x114.3 with a 63.4 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Geely Galaxy Starshine 7 (2027): 5x114.3 bolt pattern, 63.4mm center bore, OE 19x7.5J ET45. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore63.4mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2027
Category5-Lug Large Sedan/SUV
Data check: we have not yet been able to confirm this vehicle's bolt pattern and centre bore with an independent source. Measure your hub or send us a photo before ordering. Contact us
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x7.5J ET45 |
| Flush Fitment | 20x8.5J at ET38 offset |
Forged Wheel Designs for the Geely Galaxy Starshine 7
Every design below is forged to order, so it can be machined to the Geely Galaxy Starshine 7's 5x114.3 bolt pattern and 63.4 mm center bore, with the width and offset calculated for your setup.
Gunmetal Petal Machined Face Forged Wheels
Monoblock · Gunmetal
Alpine OEM-Style Hyper Silver 5 Y-Spoke Forged Wheels
Monoblock · Hyper Silver
Vossen HF-5-Style Matte Silver 5 Y-Spoke Side-Milled Forged Wheels
Replica · Matte Silver
Geely OEM-Style Matte Black 10 Y-Spoke Forged Wheels
Monoblock · Matte Black
Geely OEM-Style Gloss Black 5 Y-Split-Spoke Forged Wheels
Monoblock · Gloss Black
Black / Machined 10-Spoke Lettered-Ring Beadlock Forged Wheels
Off-Road Beadlock · Custom Finish
Gloss Black 5 Y-Spoke Petal Forged Wheels
Monoblock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Geely Galaxy Starshine 7 ships from the factory on a 5x114.3 bolt pattern with a 63.4mm center bore and a 19x7.5J ET45 wheel. Our flush reference for the Geely Galaxy Starshine 7 is 20x8.5J ET38.; our maximum aggressive reference is 21x9J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Geely Galaxy Starshine 7 OE Wheel Specs
The Geely Galaxy Starshine 7 ships from the factory on 5x114.3 bolt pattern wheels with a 63.4mm center bore. The stock wheel size is 19x7.5J ET45, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Geely Galaxy Starshine 7 (2027) we drill the 5x114.3 pattern and cut the centre bore to 63.4mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x7.5J | ET45 | 6.02 in (153 mm) | — | — |
| Flush | 20x8.5J | ET38 | 6.25 in (159 mm) | +6 mm | +20 mm |
| Maximum | 21x9J | ET35 | 6.38 in (162 mm) | +9 mm | +29 mm |
Vehicles With the Same Hub as the Geely Galaxy Starshine 7 (5x114.3, 63.4 mm Bore)
In our database, 24 other vehicle entries from 4 makes use exactly the same 5x114.3 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 1.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Geely Galaxy Starshine 7 use?
The 2027 Geely Galaxy Starshine 7 uses a 5x114.3 bolt pattern.
How many lug bolts does the Geely Galaxy Starshine 7 use?
The Geely Galaxy Starshine 7 uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Geely Galaxy Starshine 7?
The Geely Galaxy Starshine 7's center bore is 63.4mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Geely Galaxy Starshine 7?
Factory wheels on the Geely Galaxy Starshine 7 are 19x7.5J ET45.
What does a flush wheel fitment look like on the Geely Galaxy Starshine 7?
For a flush look with minimal to no rubbing, we recommend 20x8.5J at ET38 offset as a starting point on a stock or mildly lowered Geely Galaxy Starshine 7.
Do I need wheel spacers for my Geely Galaxy Starshine 7?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Geely Galaxy Starshine 7?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.25" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Geely Galaxy Starshine 7?
The Geely Galaxy Starshine 7 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x7.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.