Weld Racing-Style Gloss Black Milled 12-Spoke Polished Lip Off-Road Forged Truck Racing Wheels
Truck Racing · Gloss Black / Milled
2006 Ford F150 Harley Davidson Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ford F150 Harley Davidson wheels? This page gives the 2006 Ford F150 Harley Davidson bolt pattern (6x135), centre bore, factory rim size and the offset range for aftermarket and forged Ford F150 Harley Davidson rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006 Ford F150 Harley Davidson uses a 6x135 bolt pattern with a 87.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 22x9J ET44. For aftermarket wheels, 22x10J ET30 sits flush.
Forged wheels for the 2006 Ford F150 Harley Davidson — drilled 6x135 with a 87.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Ford F150 Harley Davidson (2006): 6x135 bolt pattern, 87.1mm center bore, OE 22x9J ET44. Forged wheel fitment specs from ANKUSI.
Bolt Pattern6x135
Wheel Bolt/NutM12x1.5 Nut
Center Bore87.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2006
Category6-Lug Off-Road (Beadlock)
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x9J ET44 |
| Flush Fitment | 22x10J at ET30 offset |
Forged Wheel Designs for the Ford F150 Harley Davidson
Every design below is forged to order, so it can be machined to the Ford F150 Harley Davidson's 6x135 bolt pattern and 87.1 mm center bore, with the width and offset calculated for your setup.
Matte Black Petal Exposed Bolt Detail Forged Wheels
Off-Road · Matte Black
10-Spoke Mesh Beadlock Gloss Black Milled Forged Wheels
Off-Road Beadlock · Custom Finish
Matte Black Semi-Full-Face Forged Wheels
Off-Road · Matte Black
Silver / Black Full-Face Machined Face Forged Wheels
Off-Road · Silver / Black
WK-Style Transparent Gold Multi-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Transparent Gold
Mazzulla-Style Mirror Polished 10-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Mirror Polished
KMC Wheels Light Gunmetal Double-Ring Off-Road Forged Wheels
Off-Road · Light Gunmetal
Ford OEM-Style Forged Wheels American Force-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Off-road platforms put real, repeated impact loads through the wheel that street-only vehicles never see, so the factory strength margin on the Ford F150 Harley Davidson isn't a formality — it's load-bearing in a literal sense. Forging matches that margin at a lower rotational weight than an equivalent cast wheel, which matters both on the trail and on the highway miles between trailheads.
The Ford F150 Harley Davidson ships from the factory on a 6x135 bolt pattern with a 87.1mm center bore and a 22x9J ET44 wheel. Our flush reference for the Ford F150 Harley Davidson is 22x10J ET30.; our maximum aggressive reference is 24x10J ET25. — beyond that, expect clearance issues against the fender liner without further modification.
Ford F150 Harley Davidson OE Wheel Specs
The Ford F150 Harley Davidson ships from the factory on 6x135 bolt pattern wheels with a 87.1mm center bore. The stock wheel size is 22x9J ET44, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford F150 Harley Davidson (2006) we drill the 6x135 pattern and cut the centre bore to 87.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 22x9J | ET44 | 6.73 in (171 mm) | — | — |
| Flush | 22x10J | ET30 | 6.68 in (170 mm) | −1 mm | +27 mm |
| Maximum | 24x10J | ET25 | 6.48 in (165 mm) | −6 mm | +32 mm |
Vehicles With the Same Hub as the Ford F150 Harley Davidson (6x135, 87.1 mm Bore)
In our database, 33 other vehicle entries from 3 makes use exactly the same 6x135 bolt pattern and 87.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x135 is used by 0.5% of the vehicle pages in our English fitment guide (34 of 6,503); 100.0% of those also use a 87.1 mm center bore.
Hub-Centric Rings for a 87.1 mm Center Bore
A wheel with a center bore larger than 87.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 93.1 mm | 93.1 → 87.1 mm |
| 100.1 mm | 100.1 → 87.1 mm |
| 106.1 mm | 106.1 → 87.1 mm |
| 108.1 mm | 108.1 → 87.1 mm |
ANKUSI forged wheels are bored to exactly 87.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Ford F150 Harley Davidson use?
The 2006 Ford F150 Harley Davidson uses a 6x135 bolt pattern.
How many lug bolts does the Ford F150 Harley Davidson use?
The Ford F150 Harley Davidson uses a 6-lug bolt pattern (6x135), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Ford F150 Harley Davidson?
The Ford F150 Harley Davidson's center bore is 87.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ford F150 Harley Davidson?
Factory wheels on the Ford F150 Harley Davidson are 22x9J ET44.
What does a flush wheel fitment look like on the Ford F150 Harley Davidson?
For a flush look with minimal to no rubbing, we recommend 22x10J at ET30 offset as a starting point on a stock or mildly lowered Ford F150 Harley Davidson.
Do I need wheel spacers for my Ford F150 Harley Davidson?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Ford F150 Harley Davidson?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.68" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ford F150 Harley Davidson?
The Ford F150 Harley Davidson runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x2.0, conical-seat lug nut.
Factory Torque Spec: 200 Nm (150 ft-lb). F-150 spec on M14x2.0 studs; confirm the exact figure for your specific model year, since Ford has revised this across generations.
TPMS: Vehicles built before the 2008 model year were not federally required to carry factory TPMS in the US, though many manufacturers adopted it earlier; verify whether your specific build has TPMS before ordering sensor-compatible wheels.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x9 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.