Toyota Aristo Bolt Pattern, Center Bore & Wheel Offset (2000–2004)
Toyota Aristo wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2000–2004). OE wheel sizes and offsets for every Aristo variant we cover (2 guides), pl
- 5x114.3bolt pattern (PCD)
- 60.1 mmcenter bore
- Nutwheel bolt / nut
- 2 guidesmodel years 2000–2004
Toyota Aristo wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2004 | Toyota Aristo | 5x114.3 | 60.1 mm | 16x7.5J |
| 2000 | Toyota Aristo | 5x114.3 | 60.1 mm | 16x7.5J |
Factory wheel sizes on the Toyota Aristo
Across the 2 Toyota Aristo trims with a documented factory wheel, the OE diameter is 16 inch, width 7.5J. A forged wheel that keeps the 5x114.3 bolt pattern and the 60.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Aristo (5x114.3)
Get a quote for Toyota Aristo wheels
Vehicles With the Same Hub as the Toyota Aristo (5x114.3, 60.1 mm Bore)
In our database, 128 other vehicle entries from 15 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.1% of the vehicle entries in our database (1,284 of 6,396); 16.1% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Aristo?
The Toyota Aristo uses a 5x114.3 bolt pattern with a 60.1mm center bore across every Aristo variant in our database (2 guides, 2000–2004).
What is the Toyota Aristo center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Aristo years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Toyota Aristo?
Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.