Citroen OEM-Style Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
2020 Citroen C5 Aircross Hybrid Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Citroen C5 Aircross Hybrid wheels? This page gives the 2020 Citroen C5 Aircross Hybrid bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Citroen C5 Aircross Hybrid rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Citroen C5 Aircross Hybrid (2020): 5x108 bolt pattern, 65.1mm center bore. Factory wheels: 18x7.5J F/R. Reference fitment ranges.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.25 Bolt
Center Bore65.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2020
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x7.5J F/R |
| Flush Fitment | 19x8.5J at ET38 offset |
| Maximum Aggressive | 20x9.0J at ET35 offset |
Forged Wheel Designs for the Citroen C5 Aircross Hybrid
Every design below is forged to order, so it can be machined to the Citroen C5 Aircross Hybrid's 5x108 bolt pattern and 65.1 mm center bore, with the width and offset calculated for your setup.
Citroen OEM-Style Metallic Gray 5-Spoke Forged Wheels
Monoblock · Metallic Gray
BBS Hyper Silver 7 Y-Spoke Forged Wheels
Replica · Hyper Silver
Scorpion Metallic Gray Exposed Bolt Detail Forged Wheels
Replica · Metallic Gray
Forgiato Bronze Multi-Spoke Forged Wheels
Replica · Bronze
Gloss Black 6 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Black / Machined 5-Window Forged Wheels
Monoblock · Gloss Black
Forgiato Matte Silver Forged Wheels
Replica · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Citroen C5 Aircross Hybrid runs a 5x108 bolt pattern, 65.1mm center bore, and a 18x7.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.5J ET38, which tucks the tire under the fender lip on a stock-height Citroen C5 Aircross Hybrid. Our Maximum Aggressive reference is 20x9.0J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Citroen C5 Aircross Hybrid OE Wheel Specs
The 2020 Citroen C5 Aircross Hybrid (SUV) uses a 5x108 bolt pattern with a 65.1mm center bore. Factory wheels are 18x7.5J F/R.
Why the factory spec works for most owners:
- Keeps the factory ride quality and noise levels intact
- A common fitment for this class, so replacement tires are easy to source
- Preserves clearance around the OE brakes and suspension geometry
- Delivers predictable, easy-to-live-with handling for daily use
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Citroen C5 Aircross Hybrid (2020) we drill the 5x108 pattern and cut the centre bore to 65.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x7.5J ET49 → ~6.18″ backspacing
- Flush: 19x8.5J ET38 → ~6.25″ backspacing
- Max: 20x9.0J ET35 → ~6.38″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Citroen spec, or want a wheel built to a custom offset for your Citroen C5 Aircross Hybrid? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Citroen C5 Aircross Hybrid use?
The 2020 Citroen C5 Aircross Hybrid uses a 5x108 bolt pattern.
How many lug bolts does the Citroen C5 Aircross Hybrid use?
The Citroen C5 Aircross Hybrid uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Citroen C5 Aircross Hybrid?
The Citroen C5 Aircross Hybrid's center bore is 65.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Citroen C5 Aircross Hybrid?
Factory wheels on the Citroen C5 Aircross Hybrid are 18x7.5J F/R.
What is the biggest wheel size I can fit on my Citroen C5 Aircross Hybrid without rubbing?
The most aggressive fitment we recommend without fender work is 20x9.0J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Citroen C5 Aircross Hybrid?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET38 offset as a starting point on a stock or mildly lowered Citroen C5 Aircross Hybrid.
Do I need wheel spacers for my Citroen C5 Aircross Hybrid?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Citroen C5 Aircross Hybrid?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.25" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Citroen C5 Aircross Hybrid?
The Citroen C5 Aircross Hybrid runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.