Omoda 9 Bolt Pattern, Center Bore & Wheel Offset (2025–2026)
Omoda 9 wheel fitment: 5x108 bolt pattern, 65.1mm center bore (2025–2026).
- 5x108bolt pattern (PCD)
- 65.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2025–2026
Omoda 9 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Omoda 9 | 5x108 | 65.1 mm | 20x7.5J |
| 2025 | Omoda 9 | 5x108 | 65.1 mm | 20x7.5J |
Factory wheel sizes on the Omoda 9
Across the 2 Omoda 9 trims with a documented factory wheel, the OE diameter is 20 inch, width 7.5J. A forged wheel that keeps the 5x108 bolt pattern and the 65.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Omoda 9 (5x108, 65.1 mm Bore)
In our database, 110 other vehicle entries from 14 makes use exactly the same 5x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 22.8% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Omoda 9?
The Omoda 9 uses a 5x108 bolt pattern with a 65.1mm center bore across every 9 variant in our database (2 guides, 2025–2026).
What is the Omoda 9 center bore?
The hub-centric center bore is 65.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Omoda 9 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Omoda 9?
Any wheel drilled 5x108 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.