Omoda C7 Bolt Pattern, Center Bore & Wheel Offset (2023–2026)
Omoda C7 wheel fitment: 5x108 bolt pattern, 65.1mm center bore (2023–2026).
- 5x108bolt pattern (PCD)
- 65.1 mmcenter bore
- 4 guidesmodel years 2023–2026
Omoda C7 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Omoda C7 | 5x108 | 65.1 mm | — |
| 2025 | Omoda C7 | 5x108 | 65.1 mm | — |
| 2024 | Omoda C7 | 5x108 | 65.1 mm | — |
| 2023 | Omoda C7 | 5x108 | 65.1 mm | — |
Vehicles With the Same Hub as the Omoda C7 (5x108, 65.1 mm Bore)
In our database, 110 other vehicle entries from 14 makes use exactly the same 5x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 22.8% of those also use a 65.1 mm center bore.
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Omoda C7?
The Omoda C7 uses a 5x108 bolt pattern with a 65.1mm center bore across every C7 variant in our database (4 guides, 2023–2026).
What is the Omoda C7 center bore?
The hub-centric center bore is 65.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Omoda C7 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Omoda C7?
Any wheel drilled 5x108 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.