2013 Kia K9 Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Kia K9 wheels? This page gives the 2013 Kia K9 bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia K9 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Kia K9 (2013): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: F: 19x8.5J R: 19x9.5J. Reference fitment ranges.

Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore67.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2013
CategorySedan

✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify

Use, cite or link this spec

Paste this code into a forum post, listing or web page to show the Kia K9 2013 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=kia-k9-2013&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Kia K9 2013 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/kia-k9-2013/">Kia K9 2013 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

Cite or link to this page (data licensed CC BY 4.0):

Kia K9 2013 bolt pattern, center bore and offset. ANKUSI Wheels. https://ankusiwheels.com/fitment-guide/kia-k9-2013/ (accessed November 21, 2026).
<a href="https://ankusiwheels.com/fitment-guide/kia-k9-2013/">Kia K9 2013 bolt pattern and offset</a>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Kia K9 wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)F: 19x8.5J R: 19x9.5J
Flush FitmentF 20x9.5J ET25 / R 20x10.5J ET30
Maximum AggressiveF 21x10.0J ET20 / R 21x11.0J ET25

Forged Wheel Designs for the Kia K9

Every design below is forged to order, so it can be machined to the Kia K9's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.

The Kia K9 runs a 5x114.3 bolt pattern, 67.1mm center bore, and a F: 19x8.5J wheel from the factory. Our Flush Fitment reference is F 20x9.5J ET25 / R 20x10.5J ET30, which tucks the tire under the fender lip on a stock-height Kia K9. Our Maximum Aggressive reference is F 21x10.0J ET20 / R 21x11.0J ET25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Kia K9 OE Wheel Specs

The 2013 Kia K9 (Sedan) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are F: 19x8.5J R: 19x9.5J.

Why the factory spec works for most owners:

  • Balances ride comfort with everyday drivability
  • A commonly used size for this vehicle class, supporting parts and tire availability
  • Maintains clearance for the factory suspension and brake components
  • Provides stable, predictable handling across normal driving conditions

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia K9 (2013) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: F 19x8.5J ET31 → ~5.97″ F backspacing, R 19x9.5J ET33 → ~6.55″ R backspacing
  • Flush: F 20x9.5J ET25 → ~6.23″ F backspacing, R 20x10.5J ET30 → ~6.93″ R backspacing
  • Max: F 21x10.0J ET20 → ~6.29″ F backspacing, R 21x11.0J ET25 → ~6.98″ R backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia K9? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Kia K9 use?
The 2013 Kia K9 uses a 5x114.3 bolt pattern.
How many lug bolts does the Kia K9 use?
The Kia K9 uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Kia K9?
The Kia K9's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Kia K9?
Factory wheels on the Kia K9 are F: 19x8.5J R: 19x9.5J.
What is the biggest wheel size I can fit on my Kia K9 without rubbing?
The most aggressive fitment we recommend without fender work is F 21x10.0J ET20 / R 21x11.0J ET25. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Kia K9?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET25 / R 20x10.5J ET30 as a starting point on a stock or mildly lowered Kia K9.
Do I need wheel spacers for my Kia K9?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Kia K9?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.23" backspacing up front and 6.93" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Kia K9?
Yes — the Kia K9's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.

Wheel Installation Reference: Torque, Thread & TPMS

Thread & Fastener: M12x1.5, conical-seat lug nut.

Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.

TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.

Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.

Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote