2014 Kia Optima Hybrid Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Kia Optima Hybrid wheels? This page gives the 2014 Kia Optima Hybrid bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Kia Optima Hybrid rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Kia Optima Hybrid (2014): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: 17x6.5J F/R. Reference fitment ranges.

Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Nut
Center Bore67.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2014
CategoryHybrid Sedan

✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify

Use, cite or link this spec

Paste this code into a forum post, listing or web page to show the Kia Optima Hybrid 2014 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=kia-optima-hybrid-2014&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Kia Optima Hybrid 2014 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/kia-optima-hybrid-2014/">Kia Optima Hybrid 2014 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

Cite or link to this page (data licensed CC BY 4.0):

Kia Optima Hybrid 2014 bolt pattern, center bore and offset. ANKUSI Wheels. https://ankusiwheels.com/fitment-guide/kia-optima-hybrid-2014/ (accessed November 21, 2026).
<a href="https://ankusiwheels.com/fitment-guide/kia-optima-hybrid-2014/">Kia Optima Hybrid 2014 bolt pattern and offset</a>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Kia Optima Hybrid wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)17x6.5J F/R
Flush Fitment18x8.0J at ET38 offset
Maximum Aggressive19x8.5J at ET35 offset

Forged Wheel Designs for the Kia Optima Hybrid

Every design below is forged to order, so it can be machined to the Kia Optima Hybrid's 5x114.3 bolt pattern and 67.1 mm center bore, with the width and offset calculated for your setup.

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.

The Kia Optima Hybrid runs a 5x114.3 bolt pattern, 67.1mm center bore, and a 17x6.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 18x8.0J ET38, which tucks the tire under the fender lip on a stock-height Kia Optima Hybrid. Our Maximum Aggressive reference is 19x8.5J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Kia Optima Hybrid OE Wheel Specs

The 2014 Kia Optima Hybrid (Hybrid Sedan) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are 17x6.5J F/R.

Why the factory spec works for most owners:

  • Balances ride comfort with everyday drivability
  • A commonly used size for this vehicle class, supporting parts and tire availability
  • Maintains clearance for the factory suspension and brake components
  • Provides stable, predictable handling across normal driving conditions

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Kia Optima Hybrid (2014) we drill the 5x114.3 pattern and cut the centre bore to 67.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: 17x6.5J ET45 → ~5.52″ backspacing
  • Flush: 18x8.0J ET38 → ~6″ backspacing
  • Max: 19x8.5J ET35 → ~6.13″ backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Kia spec, or want a wheel built to a custom offset for your Kia Optima Hybrid? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Kia Optima Hybrid use?
The 2014 Kia Optima Hybrid uses a 5x114.3 bolt pattern.
How many lug bolts does the Kia Optima Hybrid use?
The Kia Optima Hybrid uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Kia Optima Hybrid?
The Kia Optima Hybrid's center bore is 67.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Kia Optima Hybrid?
Factory wheels on the Kia Optima Hybrid are 17x6.5J F/R.
What is the biggest wheel size I can fit on my Kia Optima Hybrid without rubbing?
The most aggressive fitment we recommend without fender work is 19x8.5J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Kia Optima Hybrid?
For a flush look with minimal to no rubbing, we recommend 18x8.0J at ET38 offset as a starting point on a stock or mildly lowered Kia Optima Hybrid.
Do I need wheel spacers for my Kia Optima Hybrid?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Kia Optima Hybrid?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Kia Optima Hybrid?
The Kia Optima Hybrid runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

Wheel Installation Reference: Torque, Thread & TPMS

Thread & Fastener: M12x1.5, conical-seat lug nut.

Factory Torque Spec: 107-127 Nm (79-94 ft-lb). Range covers most Kia passenger cars and crossovers on M12x1.5 studs.

TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.

Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.

Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote