Renault Talisman Bolt Pattern, Center Bore & Wheel Offset (2020)
Renault Talisman wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore. OE wheel sizes and offsets for every Talisman variant we cover (2 guides), plus flus
- 5x114.3bolt pattern (PCD)
- 66.1 mmcenter bore
- M12x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2020
Renault Talisman wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | Renault Talisman | 5x114.3 | 66.1 mm | 18x8J ET43 |
| 2020 | Renault Talisman Estate | 5x114.3 | 66.1 mm | 18x8J ET43 |
Factory wheel sizes on the Renault Talisman
Across the 2 Renault Talisman trims with a documented factory wheel, the OE diameter is 18 inch, width 8J and offset ET43. A forged wheel that keeps the 5x114.3 bolt pattern and the 66.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Renault Talisman (5x114.3)
Shop all Renault Talisman forged wheels →
Get a quote for Renault Talisman wheels
Vehicles With the Same Hub as the Renault Talisman (5x114.3, 66.1 mm Bore)
In our database, 174 other vehicle entries from 8 makes use exactly the same 5x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle entries in our database (1,303 of 6,503); 17.3% of those also use a 66.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET43 | 6.19 in (157 mm) | — | — |
| Flush | 19x8.5J | ET38 | 6.25 in (159 mm) | +1 mm | +11 mm |
| Maximum | 20x9J | ET35 | 6.38 in (162 mm) | +5 mm | +21 mm |
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Renault Talisman?
The Renault Talisman uses a 5x114.3 bolt pattern with a 66.1mm center bore across every Talisman variant in our database (2 guides, 2020).
What is the Renault Talisman center bore?
The hub-centric center bore is 66.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Renault Talisman years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Renault Talisman?
Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.