Alfa Romeo GT Bolt Pattern, Center Bore & Wheel Offset (2003–2007)
Alfa Romeo GT wheel fitment: 5x98 bolt pattern, 58.1mm center bore (2003–2007). OE wheel sizes and offsets for every GT variant we cover (2 guides), plus flus
- 5x98bolt pattern (PCD)
- 58.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2003–2007
Alfa Romeo GT wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2007 | Alfa Romeo GT Q2 | 5x98 | 58.1 mm | 18x8.0J |
| 2003 | Alfa Romeo GT | 5x98 | 58.1 mm | 17x7.0J |
Factory wheel sizes on the Alfa Romeo GT
Across the 2 Alfa Romeo GT trims with a documented factory wheel, the OE diameter is 17-18 inch, width 7-8J. A forged wheel that keeps the 5x98 bolt pattern and the 58.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Alfa Romeo GT (5x98, 58.1 mm Bore)
In our database, 10 other vehicle entries from 5 makes use exactly the same 5x98 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x98 is used by 0.5% of the vehicle entries in our database (32 of 6,503); 96.9% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Alfa Romeo GT?
The Alfa Romeo GT uses a 5x98 bolt pattern with a 58.1mm center bore across every GT variant in our database (2 guides, 2003–2007).
What is the Alfa Romeo GT center bore?
The hub-centric center bore is 58.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Alfa Romeo GT years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Alfa Romeo GT?
Any wheel drilled 5x98 with a 58.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.