Acura MDX Bolt Pattern, Center Bore & Wheel Offset (2022–2025)
Acura MDX wheel fitment: 5x120 bolt pattern, 64.1mm center bore (2022–2025). OE wheel sizes and offsets for every MDX variant we cover (2 guides), plus flush
- 5x120bolt pattern (PCD)
- 64.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2022–2025
Acura MDX wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Acura MDX | 5x120 | 64.1 mm | 20x9.0J ET55 |
| 2025 | Acura MDX Type S | 5x120 | 64.1 mm | 21x9.5J ET55 |
Factory wheel sizes on the Acura MDX
Across the 2 Acura MDX trims with a documented factory wheel, the OE diameter is 20-21 inch, width 9-9.5J and offset ET55. A forged wheel that keeps the 5x120 bolt pattern and the 64.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Acura MDX (5x120)
Get a quote for Acura MDX wheels
Vehicles With the Same Hub as the Acura MDX (5x120, 64.1 mm Bore)
In our database, 24 other vehicle entries from 7 makes use exactly the same 5x120 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (667 of 6,503); 4.3% of those also use a 64.1 mm center bore.
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Acura MDX?
The Acura MDX uses a 5x120 bolt pattern with a 64.1mm center bore across every MDX variant in our database (2 guides, 2022–2025).
What is the Acura MDX center bore?
The hub-centric center bore is 64.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Acura MDX years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Acura MDX?
Any wheel drilled 5x120 with a 64.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.