Volvo C70 Bolt Pattern, Center Bore & Wheel Offset (2001–2010)
Volvo C70 wheel fitment: 5x108 bolt pattern, 63.4mm center bore (2007–2010); 5x108 bolt pattern, 65.1mm center bore (2001–2004). OE wheel sizes and offsets fo
- 5x108bolt pattern (PCD), most common
- 63.4 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 4 guidesmodel years 2001–2010
Bolt pattern by generation
- 5x108, 63.4 mm center bore — 2007–2010 (2 variants)
- 5x108, 65.1 mm center bore — 2001–2004 (2 variants)
Volvo C70 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2010 | Volvo C70 | 5x108 | 63.4 mm | 17x7.5J ET52 |
| 2007 | Volvo C70 | 5x108 | 63.4 mm | 16x7J ET45 |
| 2004 | Volvo C70 Convertible | 5x108 | 65.1 mm | 16x7J ET43 |
| 2001 | Volvo C70 Coupe | 5x108 | 65.1 mm | 16x7J ET43 |
Factory wheel sizes on the Volvo C70
Across the 4 Volvo C70 trims with a documented factory wheel, the OE diameter is 16-17 inch, width 7-7.5J and offset ET43-52. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Volvo C70 (5x108)
Shop all Volvo C70 forged wheels →
Get a quote for Volvo C70 wheels
Vehicles With the Same Hub as the Volvo C70 (5x108, 63.4 mm Bore)
In our database, 211 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.6% of the vehicle entries in our database (496 of 6,503); 55.8% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Volvo C70?
The Volvo C70 uses a 5x108 bolt pattern on most variants we cover with a 63.4mm center bore. Other generations use 5x108 / 65.1mm (2001–2004). Always check the exact year and trim before ordering.
What is the Volvo C70 center bore?
The hub-centric center bore is 63.4 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Volvo C70 years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Volvo C70?
Any wheel drilled 5x108 with a 63.4mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.