Cadillac SLS Bolt Pattern, Center Bore & Wheel Offset (2007–2010)
Cadillac SLS wheel fitment: 5x115 bolt pattern, 70.3mm center bore (2007–2010). OE wheel sizes and offsets for every SLS variant we cover (2 guides), plus flu
- 5x115bolt pattern (PCD)
- 70.3 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2007–2010
Cadillac SLS wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2010 | Cadillac SLS | 5x115 | 70.3 mm | 18x8J ET48 |
| 2007 | Cadillac SLS | 5x115 | 70.3 mm | 18x8.0J |
Factory wheel sizes on the Cadillac SLS
Across the 2 Cadillac SLS trims with a documented factory wheel, the OE diameter is 18 inch, width 8J and offset ET48. A forged wheel that keeps the 5x115 bolt pattern and the 70.3 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Cadillac SLS (5x115)
Shop all Cadillac SLS forged wheels →
Get a quote for Cadillac SLS wheels
Vehicles With the Same Hub as the Cadillac SLS (5x115, 70.3 mm Bore)
In our database, 110 other vehicle entries from 8 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle entries in our database (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cadillac SLS?
The Cadillac SLS uses a 5x115 bolt pattern with a 70.3mm center bore across every SLS variant in our database (2 guides, 2007–2010).
What is the Cadillac SLS center bore?
The hub-centric center bore is 70.3 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cadillac SLS years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Cadillac SLS?
Any wheel drilled 5x115 with a 70.3mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.