Cadillac OEM-Style Gloss Black Turbine Multi-Spoke Forged Wheels
Cadillac CT5 / CT4 Fitment · 5-Lug
2010 Cadillac SLS Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Cadillac SLS wheels? This page gives the 2010 Cadillac SLS bolt pattern (5x115), centre bore, factory rim size and the offset range for aftermarket and forged Cadillac SLS rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2010 Cadillac SLS uses a 5x115 bolt pattern with a 70.3 mm centre bore and M12x1.5 lug nuts. Factory wheels: 18x8J at ET48. For aftermarket wheels, 19x8.5J ET35 sits flush and 20x9J ET30 is the most aggressive fit.
Forged wheels for the 2010 Cadillac SLS — drilled 5x115 with a 70.3 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Cadillac SLS (2010): 5x115 bolt pattern, 70.3mm center bore. Factory wheels: 18x8J. Reference fitment ranges.
Bolt Pattern5x115
Wheel Bolt/NutM12x1.5 Nut
Center Bore70.3mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2010
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 18x8J at ET48 |
| Flush Fitment | 19x8.5J at ET35 offset |
| Maximum Aggressive | 20x9J at ET30 offset |
Forged wheels for the Cadillac SLSMachined to the 5x115 bolt pattern and 70.3 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Cadillac SLS runs a 5x115 bolt pattern, 70.3mm center bore, and a 18x8J at ET48, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8.5J ET35, which tucks the tire under the fender lip on a stock-height Cadillac SLS. Our Maximum Aggressive reference is 20x9J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Cadillac SLS OE Wheel Specs
The 2010 Cadillac SLS (Sedan) uses a 5x115 bolt pattern with a 70.3mm center bore. Factory wheels are 18x8J at ET48.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Cadillac SLS (2010) we drill the 5x115 pattern and cut the centre bore to 70.3mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, 19x8.5J ET35 is the recommended starting point on a stock or mildly lowered Cadillac SLS.
Maximum Aggressive Fitment
20x9J ET30 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Real-World Fitment Notes
Long wheelbase Sigma platform for China
5-Tier Configuration Options
A Factory-Style 18x8.0J ET48
Recommended setup: 18x8.0J ET48 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 19x8.5J ET42
Recommended setup: 19x8.5J ET42 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 19x8.5J ET35
Recommended setup: 19x8.5J ET35 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 20x9.0J ET33
Recommended setup: 20x9.0J ET33 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 20x9.0J ET30
Recommended setup: 20x9.0J ET30 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 18x8.0J ET48 | 19x8.5J ET42 | 19x8.5J ET35 | 20x9.0J ET33 | 20x9.0J ET30 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 18x8.0J ET48
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 19x8.5J ET35
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 20x9.0J ET30
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Cadillac SLS owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 18x8J ET48 → ~6.39″ backspacing
- Flush: 19x8.5J ET35 → ~6.13″ backspacing
- Max: 20x9J ET30 → ~6.18″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Cadillac spec, or want a wheel built to a custom offset for your Cadillac SLS? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Cadillac SLS (2010)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x115 pattern and the 70.3mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Cadillac orders on this platform land somewhere between the 19x8.5J ET35 flush setup and the 20x9J ET30 aggressive setup referenced above.
Designs we already tool for the 5x115 pattern — each one is re-cut to your sizes and offsets:
Cadillac OEM-Style Gloss Black Turbine Multi-Spoke Forged Wheels – Cadillac CT5 / CT4 Fitment (5-Lug)
Cadillac OEM-Style Bronze Mesh Multi-Spoke Forged Wheels – Cadillac CT5 / CT4 Fitment (5-Lug)
Cadillac OEM-Style Polished Multi-Spoke Red Lip Floating Cap Forged Wheels – Cadillac CTS / ATS Fitment (5-Lug)
Cadillac CT5 / CT4 Forged Wheels – Matte SilverFrequently Asked Questions
What bolt pattern (PCD) does the Cadillac SLS use?
The 2010 Cadillac SLS uses a 5x115 bolt pattern.
How many lug bolts does the Cadillac SLS use?
The Cadillac SLS uses a 5-lug bolt pattern (5x115), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Cadillac SLS?
The Cadillac SLS's center bore is 70.3mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Cadillac SLS?
Factory wheels on the Cadillac SLS are 18x8J at ET48.
What is the biggest wheel size I can fit on my Cadillac SLS without rubbing?
The most aggressive fitment we recommend without fender work is 20x9J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Cadillac SLS?
For a flush look with minimal to no rubbing, we recommend 19x8.5J at ET35 offset as a starting point on a stock or mildly lowered Cadillac SLS.
Do I need wheel spacers for my Cadillac SLS?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Cadillac SLS?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Cadillac SLS?
The Cadillac SLS runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Cadillac SLS (5x115, 70.3 mm Bore)
In our database, 134 other vehicle entries from 9 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
Cadillac SLS: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2007 | 5x115 | 70.3 mm | 18x8J |
| 2010 | 5x115 | 70.3 mm | 18x8J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2007–2010).
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 18x8 wheels · 18 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Cadillac SLS
Every design below is forged to order, so it can be machined to the Cadillac SLS's 5x115 bolt pattern and 70.3 mm center bore, with the width and offset calculated for your setup.
Cadillac OEM-Style Polished Multi-Spoke Red Lip Floating Cap Forged Wheels
Cadillac CTS / ATS Fitment · 5-Lug
Porsche 911 / Panamera Forged Wheels
Gloss Black Mesh
APEX VS-5RS-Style Chrome Black 10-Spoke Y-Design Forged Wheels
BMW M3 CS Handschalter Fitment · 19-21in, 5x112
Cadillac OEM-Style Bronze Mesh Multi-Spoke Forged Wheels
Cadillac CT5 / CT4 Fitment · 5-Lug
Cadillac OEM-Style Chrome Multi-Spoke Dish Floating Cap Forged Wheels
Cadillac CT5 / CT4 Fitment · 5-Lug
Cadillac CT5 / CT4 Forged Wheels
Matte Silver
Cadillac CT5 / CT6 Forged Wheels
Gloss Black Multi-Spoke
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.