Audi SQ7 Bolt Pattern, Center Bore & Wheel Offset (2020–2027)
Audi SQ7 wheel fitment: 5x112 bolt pattern, 66.5mm center bore (2020–2027). OE wheel sizes and offsets for every SQ7 variant we cover (4 guides), plus flush a
- 5x112bolt pattern (PCD)
- 66.5 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 4 guidesmodel years 2020–2027
Audi SQ7 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2027 | Audi SQ7 | 5x112 | 66.5 mm | 21x9.5J |
| 2025 | Audi SQ7 [US] | 5x112 | 66.5 mm | 21x9.5J |
| 2021 | Audi SQ7 TFSI | 5x112 | 66.5 mm | 21x9.5J ET30 |
| 2020 | Audi SQ7 TDI | 5x112 | 66.5 mm | 21x9.5J ET30 |
Factory wheel sizes on the Audi SQ7
Across the 4 Audi SQ7 trims with a documented factory wheel, the OE diameter is 21 inch, width 9.5J and offset ET30. A forged wheel that keeps the 5x112 bolt pattern and the 66.5 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Audi SQ7 (5x112)
Shop all Audi SQ7 forged wheels →
Get a quote for Audi SQ7 wheels
Vehicles With the Same Hub as the Audi SQ7 (5x112, 66.5 mm Bore)
In our database, 23 other vehicle entries from 5 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle entries in our database (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Audi SQ7?
The Audi SQ7 uses a 5x112 bolt pattern with a 66.5mm center bore across every SQ7 variant in our database (4 guides, 2020–2027).
What is the Audi SQ7 center bore?
The hub-centric center bore is 66.5 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Audi SQ7 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Audi SQ7?
Any wheel drilled 5x112 with a 66.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.