Lexus RC F Sport (2013-2026) Wheel Fitment

Lexus RC F Sport (2013-2026): 5x114.3 bolt pattern, 60.1mm center bore. Factory wheels: 19x8.0J at ET45 offset, front and rear. Reference fitment ranges.

Bolt Pattern5x114.3
Center Bore60.1mm
Year2013-2026
CategoryEV Sedan

Wheel Size & Offset at a Glance

Lexus RC F Sport wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Factory (OE)19x8.0J F/R
Flush FitmentF 19x8.5J ET35 / R 19x9.5J ET35
Maximum AggressiveF 19x8.5J ET35 / R 19x9.5J ET35

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

Lexus RC F Sport OE Wheel Specs

The 2013-2026 Lexus RC F Sport (EV Sedan) uses a 5x114.3 bolt pattern with a 60.1mm center bore. Factory wheels are 19x8.0J F/R.

Why the factory spec works for most owners:

  • Balances ride comfort with everyday fuel efficiency
  • A widely used size in this segment, so tire and wheel availability stays strong
  • Keeps unsprung weight low for stable, predictable handling
  • Maintains clearance for the factory brake calipers and suspension components

Flush Fitment

For a flush look, F/R 19x9.0J ET40 is a commonly used starting point — clearance must be verified on a stock or mildly lowered Lexus RC F Sport.

Maximum Aggressive Fitment

F 19x8.5J ET35 / R 19x9.5J ET35 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.

5-Tier Configuration Options

A

Factory-Style

F 19x8.0J ET45 / R 19x8.0J ET45

Recommended setup: F 19x8.0J ET45 / R 19x8.0J ET45 | Economy impact: Negligible | Best for: Daily commuting, family use

Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆

Estimated cost: $450-800 (wheels + tires + install)

B

Comfortable Upgrade

F 19x8.5J ET40 / R 19x9.0J ET40

Recommended setup: F 19x8.5J ET40 / R 19x9.0J ET40 | Economy impact: -2 to -4% | Best for: Daily / street

Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆

Estimated cost: $1,950-2,550 (wheels + tires + install)

C

Balanced / Flush Fit

F 19x8.5J ET35 / R 19x9.5J ET35

Recommended setup: F 19x8.5J ET35 / R 19x9.5J ET35 | Economy impact: -4 to -6% | Best for: Street

Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆

Estimated cost: $2,600-3,400 (wheels + tires + install)

D

Aggressive

F 19x8.5J ET35 / R 19x9.5J ET35

Recommended setup: F 19x8.5J ET35 / R 19x9.5J ET35 | Economy impact: -6 to -9% | Best for: Show / occasional track

Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆

Estimated cost: $3,900-5,000 (wheels + tires + install)

E

Max Aggressive

F 19x8.5J ET35 / R 19x9.5J ET35

Recommended setup: F 19x8.5J ET35 / R 19x9.5J ET35 | Economy impact: -8 to -12% | Best for: Show only

Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆

Estimated cost: $4,800-6,200+ (wheels + tires + install)

Performance Comparison Matrix

MetricTier ATier BTier CTier DTier E
Wheel SpecF 19x8.0J ET45 / R 19x8.0J ET45F 19x8.5J ET40 / R 19x9.0J ET40F 19x8.5J ET35 / R 19x9.5J ET35F 19x8.5J ET35 / R 19x9.5J ET35F 19x8.5J ET35 / R 19x9.5J ET35
Economy ImpactNegligible-2 to -4%-4 to -6%-6 to -9%-8 to -12%
Appearance7/108/108.5/109/109.5/10
Comfort9.5/109/108/106.5/104/10
Install Difficulty★☆☆☆☆★☆☆☆☆★★☆☆☆★★★☆☆★★★★☆
Cost Range$450-800$1,950-2,550$2,600-3,400$3,900-5,000$4,800-6,200+
Best ForDaily commuting, family useDaily / streetStreetShow / occasional trackShow only

Real-World Reference Cases

The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.

Case 1: Daily Driver (Factory-Style)

Profile: Everyday driving, prioritizes comfort and low running cost.

Setup: F 19x8.0J ET45 / R 19x8.0J ET45

Cost: ~$620

Outcome: Minimal visual change, ride and fuel economy essentially unaffected.

Case 2: Balanced Enthusiast (Balanced / Flush Fit)

Profile: Wants a sportier stance without sacrificing daily usability.

Setup: F 19x8.5J ET35 / R 19x9.5J ET35

Cost: ~$3,000

Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.

Case 3: Show Build (Max Aggressive)

Profile: Built primarily for shows or occasional track/show use.

Setup: F 19x8.5J ET35 / R 19x9.5J ET35

Cost: ~$5,500

Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.

Decision Guide

1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Lexus RC F Sport owners.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

  • OE: 19x8.0J ET45 → ~6.27″ backspacing
  • Flush: 19x9.0J ET40 → ~6.57″ backspacing
  • Max: F 19x8.5J ET35 → ~6.13″ F backspacing, R 19x9.5J ET35 → ~6.63″ R backspacing

A Note on Clearance

Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Lexus spec, or want a wheel built to a custom offset for your Lexus RC F Sport? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What bolt pattern (PCD) does the Lexus RC F Sport use?
The 2013-2026 Lexus RC F Sport uses a 5x114.3 bolt pattern.
How many lug bolts does the Lexus RC F Sport use?
The Lexus RC F Sport uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lexus RC F Sport?
The Lexus RC F Sport's center bore is 60.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Lexus RC F Sport?
Factory wheels on the Lexus RC F Sport are 19x8.0J F/R.
What is the biggest wheel size I can fit on my Lexus RC F Sport without rubbing?
The most aggressive fitment we recommend without fender work is F 19x8.5J ET35 / R 19x9.5J ET35. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Lexus RC F Sport?
For a flush look with minimal to no rubbing, we recommend F 19x8.5J ET35 / R 19x9.5J ET35 as a starting point on a stock or mildly lowered Lexus RC F Sport.
Do I need wheel spacers for my Lexus RC F Sport?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lexus RC F Sport?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" backspacing up front and 6.63" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lexus RC F Sport?
Yes — the Lexus RC F Sport's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote