Gloss Black 5-Spoke Polished Lip Forged Wheels
Monoblock · Gloss Black
2019 Chevrolet Malibu Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Malibu wheels? This page gives the 2019 Chevrolet Malibu bolt pattern (5x115), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Malibu rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2019 Chevrolet Malibu uses a 5x115 bolt pattern with a 70.3 mm centre bore and M12x1.5 lug nuts. Factory wheels: 19x8.5J ET45, front and rear. For aftermarket wheels, 20x9.0J ET35 sits flush and 21x9.5J ET30 is the most aggressive fit.
Forged wheels for the 2019 Chevrolet Malibu — drilled 5x115 with a 70.3 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Chevrolet Malibu (2019): 5x115 bolt pattern, 70.3mm center bore. Factory wheels: 19x8.5J at ET45 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x115
Wheel Bolt/NutM12x1.5 Nut
Center Bore70.3mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2019
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8.5J F/R |
| Flush Fitment | 20x9.0J at ET35 offset |
| Maximum Aggressive | 21x9.5J at ET30 offset |
Forged Wheel Designs for the Chevrolet Malibu
Every design below is forged to order, so it can be machined to the Chevrolet Malibu's 5x115 bolt pattern and 70.3 mm center bore, with the width and offset calculated for your setup.
Corvette OEM-Style Transparent Gray 10-Spoke Forged Wheels
Monoblock · Transparent Gray
Corvette OEM-Style Gloss Black Web-Mesh Forged Wheels
Monoblock · Gloss Black
Corvette OEM-Style Gloss Black 5 Y-Spoke Concave Forged Wheels
Concave · Gloss Black
Mirror Polished Swirl Smoothie Forged Wheels
Monoblock · Chrome
Brushed Silver 10-Spoke Beadlock Forged Wheels
Off-Road Beadlock · Brushed Silver
Belak-Style Gloss Black Milled 12 Y-Spoke Beadlock Forged Drag Racing Wheels
Drag Racing · Custom Finish
Weld Racing-Style Black / Machined 10 Y-Spoke Beadlock Forged Drag Racing Wheels
Drag Racing · Custom Finish
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Chevrolet Malibu's factory wheel spec reflects a deliberate balance between comfort, steering feel and durability that the engineering team tuned for. Forging lets ANKUSI match that same strength target while trimming rotational mass — the part of a wheel upgrade that actually changes how the car drives, not just how it looks.
The Chevrolet Malibu runs a 5x115 bolt pattern, 70.3mm center bore, and a 19x8.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9.0J ET35, which tucks the tire under the fender lip on a stock-height Chevrolet Malibu. Our Maximum Aggressive reference is 21x9.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Malibu OE Wheel Specs
The 2019 Chevrolet Malibu (Sedan) uses a 5x115 bolt pattern with a 70.3mm center bore. Factory wheels are 19x8.5J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Malibu (2019) we drill the 5x115 pattern and cut the centre bore to 70.3mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Malibu? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Chevrolet Malibu: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2000 | 5x115 | 70.3 mm | 15x6J ET42 |
| 2004 | 5x110 | 65.1 mm | 16x6.5J ET41 |
| 2013 | 5x120 | 67.1 mm | 18x8J ET41 |
| 2014 | 5x120 | 67.1 mm | 18x8J ET41 |
| 2016 | 5x115 | 70.3 mm | 19x8.5J ET45 |
| 2019 | 5x115 | 70.3 mm | 19x8.5J ET45 |
Check the model year before ordering: the specs change — bolt pattern 5x115 → 5x110 from 2004; center bore 70.3 mm → 65.1 mm from 2004; bolt pattern 5x110 → 5x120 from 2013; center bore 65.1 mm → 67.1 mm from 2013; bolt pattern 5x120 → 5x115 from 2016; center bore 67.1 mm → 70.3 mm from 2016.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET45 | 6.52 in (166 mm) | — | — |
| Flush | 20x9J | ET35 | 6.38 in (162 mm) | −4 mm | +16 mm |
| Maximum | 21x9.5J | ET30 | 6.43 in (163 mm) | −2 mm | +28 mm |
Vehicles With the Same Hub as the Chevrolet Malibu (5x115, 70.3 mm Bore)
In our database, 134 other vehicle entries from 9 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Malibu use?
The 2019 Chevrolet Malibu uses a 5x115 bolt pattern.
How many lug bolts does the Chevrolet Malibu use?
The Chevrolet Malibu uses a 5-lug bolt pattern (5x115), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Malibu?
The Chevrolet Malibu's center bore is 70.3mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Malibu?
Factory wheels on the Chevrolet Malibu are 19x8.5J F/R.
What is the biggest wheel size I can fit on my Chevrolet Malibu without rubbing?
The most aggressive fitment we recommend without fender work is 21x9.5J at ET30 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Malibu?
For a flush look with minimal to no rubbing, we recommend 20x9.0J at ET35 offset as a starting point on a stock or mildly lowered Chevrolet Malibu.
Do I need wheel spacers for my Chevrolet Malibu?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Malibu?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.38" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Malibu?
The Chevrolet Malibu runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.