Jeep Wrangler / Land Cruiser Forged Wheels
Matte Black Semi-Full-Face · 5-Lug
2026 Jeep Recon Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Jeep Recon wheels? This page gives the 2026 Jeep Recon bolt pattern (5x127), centre bore, factory rim size and the offset range for aftermarket and forged Jeep Recon rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 Jeep Recon uses a 5x127 bolt pattern with a 71.5 mm centre bore. Factory wheels: 20x8.5J at ET40. For aftermarket wheels, 20x9.5J ET25 sits flush and 21x10J ET20 is the most aggressive fit.
Forged wheels for the 2026 Jeep Recon — drilled 5x127 with a 71.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Jeep Recon (2026): 5x127 bolt pattern, 71.5mm center bore. Factory wheels: 20x8.5J. Reference fitment ranges.
Bolt Pattern5x127
Wheel Bolt/Nut1/2\"x20 Nut
Center Bore71.5mm
Wheel Load Rating1035–1438 kg/wheel (SUV segment reference)
Year2026
CategoryEV SUV
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x8.5J at ET40 |
| Flush Fitment | 20x9.5J at ET25 offset |
| Maximum Aggressive | 21x10J at ET20 offset |
Forged wheels for the Jeep ReconMachined to the 5x127 bolt pattern and 71.5 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Jeep Recon's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Jeep Recon runs a 5x127 bolt pattern, 71.5mm center bore, and a 20x8.5J at ET40, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9.5J ET25, which tucks the tire under the fender lip on a stock-height Jeep Recon. Our Maximum Aggressive reference is 21x10J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Jeep Recon OE Wheel Specs
The 2026 Jeep Recon (EV SUV) uses a 5x127 bolt pattern with a 71.5mm center bore. Factory wheels are 20x8.5J at ET40.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Jeep Recon (2026) we drill the 5x127 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, 20x9.5J ET25 is the recommended starting point on a stock or mildly lowered Jeep Recon.
Maximum Aggressive Fitment
21x10J ET20 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Real-World Fitment Notes
Chassis: STLA Large platform. EV suspension lifts in development. Wheels: High load rating required.
5-Tier Configuration Options
A Factory-Style 20x8.5J ET40
Recommended setup: 20x8.5J ET40 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 20x9.0J ET33
Recommended setup: 20x9.0J ET33 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 20x9.5J ET25
Recommended setup: 20x9.5J ET25 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 21x10.0J ET23
Recommended setup: 21x10.0J ET23 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 21x10.0J ET20
Recommended setup: 21x10.0J ET20 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 20x8.5J ET40 | 20x9.0J ET33 | 20x9.5J ET25 | 21x10.0J ET23 | 21x10.0J ET20 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 20x8.5J ET40
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 20x9.5J ET25
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 21x10.0J ET20
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Jeep Recon owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 20x8.5J ET40 → ~6.32″ backspacing
- Flush: 20x9.5J ET25 → ~6.23″ backspacing
- Max: 21x10J ET20 → ~6.29″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Jeep spec, or want a wheel built to a custom offset for your Jeep Recon? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Jeep Recon (2026)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x127 pattern and the 71.5mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Jeep orders on this platform land somewhere between the 20x9.5J ET25 flush setup and the 21x10J ET20 aggressive setup referenced above.
Designs we already tool for the 5x127 pattern — each one is re-cut to your sizes and offsets:
Jeep OEM-Style Matte Gunmetal Steelie Dish Forged Wheels – Jeep Wrangler / Grand Cherokee Fitment (5-Lug)
Jeep Wrangler / Land Cruiser Beadlock Off-Road Forged Wheels – Brushed Silver Mesh (5-Lug)
Jeep Wrangler / Land Rover Defender Off-Road Forged Wheels – Gunmetal 5-Spoke Machined Lip (5-Lug)
Jeep Wrangler / Land Cruiser Beadlock Off-Road Forged Wheels – Matte Black Steelie-Style (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Jeep Recon use?
The 2026 Jeep Recon uses a 5x127 bolt pattern.
How many lug bolts does the Jeep Recon use?
The Jeep Recon uses a 5-lug bolt pattern (5x127), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Jeep Recon?
The Jeep Recon's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Jeep Recon?
Factory wheels on the Jeep Recon are 20x8.5J at ET40.
What is the biggest wheel size I can fit on my Jeep Recon without rubbing?
The most aggressive fitment we recommend without fender work is 21x10J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Jeep Recon?
For a flush look with minimal to no rubbing, we recommend 20x9.5J at ET25 offset as a starting point on a stock or mildly lowered Jeep Recon.
Do I need wheel spacers for my Jeep Recon?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Jeep Recon?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.23" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Jeep Recon?
The Jeep Recon runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Jeep Recon (5x127, 71.5 mm Bore)
In our database, 64 other vehicle entries from 5 makes use exactly the same 5x127 bolt pattern and 71.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x127 is used by 1.3% of the vehicle pages in our English fitment guide (82 of 6,503); 79.3% of those also use a 71.5 mm center bore.
Hub-Centric Rings for a 71.5 mm Center Bore
A wheel with a center bore larger than 71.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 71.6 mm | 71.6 → 71.5 mm |
| 72.6 mm | 72.6 → 71.5 mm |
| 73.1 mm | 73.1 → 71.5 mm |
| 74.1 mm | 74.1 → 71.5 mm |
ANKUSI forged wheels are bored to exactly 71.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Jeep Recon
Every design below is forged to order, so it can be machined to the Jeep Recon's 5x127 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Jeep Wrangler / Land Rover Defender Beadlock Off-Road Forged Wheels
Gloss Black Bolted Ring Hole Pattern · 5-Lug
Jeep OEM-Style Brushed Silver Mesh Beadlock Off-Road Forged Wheels
Jeep Wrangler / Grand Cherokee Fitment · 5-Lug
WK-Style Gloss Black Machined Mesh Beadlock Off-Road Forged Wheels
Jeep Wrangler / Grand Cherokee Fitment · 5-Lug
Black Rhino-Style Rhino Gloss White Full-Face Exposed Bolt Detail Forged Wheels
Jeep Wrangler / Land Cruiser Fitment · 5-Lug
Jeep Wrangler / Toyota Land Cruiser Forged Wheels
Matte Black Exposed Bolt Detail
Jeep Wrangler / Land Cruiser Forged Wheels
Mirror Polished Slotted Dish · 5-Lug
DOS Engineering-Style Matte Bronze 6-Spoke Off-Road Forged Wheels
Jeep Wrangler / Defender Fitment · 5-Lug
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.