WF Matte Bronze 5 Y-Spoke Forged Wheels
Replica · Matte Bronze
2025 Audi RS3 Sedan Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Audi RS3 Sedan wheels? This page gives the 2025 Audi RS3 Sedan bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Audi RS3 Sedan rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Audi RS3 Sedan uses a 5x112 bolt pattern with a 57.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 19x9.0J R: 19x8.0J. For aftermarket wheels, 19x9.5J ET20 front / 19x8.5J ET40 rear sits flush and 19x10.0J ET15 front / 19x9.0J ET35 rear is the most aggressive fit.
Forged wheels for the 2025 Audi RS3 Sedan — drilled 5x112 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Audi RS3 Sedan (2025): 5x112 bolt pattern, 57.1mm center bore. Factory wheels: F: 19x9.0J R: 19x8.0J. Reference fitment ranges.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.5 Bolt
Center Bore57.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo 8-piston fixed front caliper (OEM, Audi RS)
Year2025
CategorySedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x9.0J R: 19x8.0J |
| Flush Fitment | F 19x9.5J ET20 / R 19x8.5J ET40 |
| Maximum Aggressive | F 19x10.0J ET15 / R 19x9.0J ET35 |
Forged Wheel Designs for the Audi RS3 Sedan
Every design below is forged to order, so it can be machined to the Audi RS3 Sedan's 5x112 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
Advan-Style Satin Black 6-Spoke Forged Wheels
Monoblock · Satin Black
Gloss Black Split Directional Machined Face Forged Wheels
Monoblock · Gloss Black
Audi OEM-Style Gloss Black Forged Wheels
Replica · Gloss Black
Gloss Black 5-Spoke Gold-Lip Forged Wheels
2-Piece · Custom Finish
Rotiform Gloss White Round-Hole Disc Forged Wheels
Replica · Gloss White
HRE Performance P200-Style Light Gunmetal Cross-Spoke Forged Wheels
Replica · Light Gunmetal
Matte Silver 5 Y-Spoke Forged Wheels
Monoblock · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The RS3's factory staggered setup is already tuned around Audi's Quattro torque split, so any wheel change that keeps the front-wider, rear-narrower relationship intact — just lighter — preserves the balance the factory suspension engineers actually calibrated for, rather than second-guessing it with a square fitment that wasn't part of the original tune.
The RS3 Sedan runs a 5x112 bolt pattern, 57.1mm center bore, and a staggered 19x9.0J front / 19x8.0J rear from the factory. Our Flush Fitment reference is 19x9.5J ET20 front and 19x8.5J ET40 rear, filling the fender opening on a stock or mildly lowered car. Our Maximum Aggressive reference steps to 19x10.0J ET15 front and 19x9.0J ET35 rear — beyond that, expect rubbing under compression without fender rolling.
Audi RS3 Sedan OE Wheel Specs
The 2025 Audi RS3 Sedan (Sedan) uses a 5x112 bolt pattern with a 57.1mm center bore. Factory wheels are F: 19x9.0J R: 19x8.0J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Audi RS3 Sedan (2025) we drill the 5x112 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x9.0J ET25 → ~5.98″ F backspacing, R 19x8.0J ET46 → ~6.31″ R backspacing
- Flush: F 19x9.5J ET20 → ~6.04″ F backspacing, R 19x8.5J ET40 → ~6.32″ R backspacing
- Max: F 19x10.0J ET15 → ~6.09″ F backspacing, R 19x9.0J ET35 → ~6.38″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Audi spec, or want a wheel built to a custom offset for your Audi RS3 Sedan? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Audi RS3 Sedan: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2022 | 5x112 | 57.1 mm | 19x9J |
| 2025 | 5x112 | 57.1 mm | 19x9J |
Bolt pattern and center bore stay the same across all 2 model years in our database (2022–2025).
Vehicles With the Same Hub as the Audi RS3 Sedan (5x112, 57.1 mm Bore)
In our database, 407 other vehicle entries from 18 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 29.0% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Audi RS3 Sedan use?
The 2025 Audi RS3 Sedan uses a 5x112 bolt pattern.
How many lug bolts does the Audi RS3 Sedan use?
The Audi RS3 Sedan uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Audi RS3 Sedan?
The Audi RS3 Sedan's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Audi RS3 Sedan?
Factory wheels on the Audi RS3 Sedan are F: 19x9.0J R: 19x8.0J.
What is the biggest wheel size I can fit on my Audi RS3 Sedan without rubbing?
The most aggressive fitment we recommend without fender work is F 19x10.0J ET15 / R 19x9.0J ET35. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Audi RS3 Sedan?
For a flush look with minimal to no rubbing, we recommend F 19x9.5J ET20 / R 19x8.5J ET40 as a starting point on a stock or mildly lowered Audi RS3 Sedan.
Do I need wheel spacers for my Audi RS3 Sedan?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Audi RS3 Sedan?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.04" backspacing up front and 6.32" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Audi RS3 Sedan?
Yes — the Audi RS3 Sedan's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x1.5, ball-seat lug bolt (13mm radius).
Factory Torque Spec: 120 Nm (89 ft-lb). Shared VW/Audi Group ball-seat bolt spec used across most 5x112 Audi models.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x9 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.