Zeekr OEM-Style Bronze Mesh Forged Wheels
Zeekr 001 / 009 Fitment · 5-Lug
Zeekr Wheel Fitment Guide
2 fitment guides for Zeekr, covering 2024 to 2026, built around the 5x108 bolt pattern. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Zeekr Bolt Pattern & Center Bore Notes
Every Zeekr model we currently cover uses the same 5x108 bolt pattern with a 63.4mm center bore. As we add more Zeekr model years to this guide we will flag any generation that changes this here — always double-check the specific model page below since older or international-market versions can differ.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Zeekr model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Zeekr
The most common Zeekr fitment in our guide is 5x108 with a 63.4 mm center bore (2 of 2 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x108 that distance is 63.5 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged Wheels for Zeekr
Forged-to-order wheel designs matched to Zeekr bolt patterns. Every set is machined to your exact model, offset and center bore.
Zeekr 001 / 007 Forged Wheels
Black / Machined 5-Window · 5-Lug
Zeekr OEM-Style Brushed Silver 5-Spoke Forged Wheels
Zeekr 001 / 009 Fitment · 5-Lug
Zeekr OEM-Style Matte Silver Directional Milled Forged Wheels
Zeekr 001 / 009 Fitment · 5-Lug
Zeekr OEM-Style Gloss Black Machined 5-Spoke Swirl Directional Forged Wheels
Zeekr 001 / Zeekr 007 Fitment · 5-Lug
Zeekr OEM-Style Gloss Black Split-Spoke Machined Face Forged Wheels
Zeekr 001 / 009 Fitment · 5-Lug
Zeekr 001 / 009 Forged Wheels
Gloss Black 5 W-Spoke Split
Zeekr 001 / 007 Forged Wheels
Gunmetal Mesh
Vehicles Using 5x108 With a 63.4 mm Center Bore
In our database, 275 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle entries in our database (498 of 6,503); 55.6% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.