Custom Forged Wheels for the Mitsubishi Lancer (5x114.3)
ANKUSI forges custom wheels for the Mitsubishi Lancer, drilled 5x114.3 with a 67.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 18x7J ET46 (model year 2016).
Recommended wheel sizes for the Mitsubishi Lancer
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 18x7J | ET46 |
| Flush | 19x8J | ET38 |
| Max | 19x8.5J | ET35 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Mitsubishi Lancer
Forged wheels that can be drilled for the Mitsubishi Lancer
Mitsubishi OEM-Style Gunmetal 10-Spoke Forged Wheels – Mitsubishi Lancer Evolution / Diamante Fitment (5-Lug)
Mitsubishi OEM-Style Bronze Mesh Forged Wheels – Mitsubishi Lancer Evolution / Diamante Fitment (5-Lug)
Alpine OEM-Style Hyper Silver 5 Y-Spoke Forged Wheels – Alpine A290 Fitment (5-Lug)Get a quote for Mitsubishi Lancer wheels
Vehicles With the Same Hub as the Mitsubishi Lancer (5x114.3, 67.1 mm Bore)
In our database, 415 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7J | ET46 | 5.81 in (148 mm) | — | — |
| Flush | 19x8J | ET38 | 6.00 in (152 mm) | +5 mm | +21 mm |
| Maximum | 19x8.5J | ET35 | 6.13 in (156 mm) | +8 mm | +30 mm |
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in 18–22 days, then shipped.
FAQ
How long do custom forged wheels for the Mitsubishi Lancer take?
18–22 days of production after the specs are confirmed. Every wheel is drilled 5x114.3 with a 67.1 mm center bore.
What is the factory wheel size of the Mitsubishi Lancer?
The factory size in our database is 18x7J ET46. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Mitsubishi Lancer flush?
We recommend 19x8J ET38 for a flush fit and 19x8.5J ET35 as the maximum. Check clearance before ordering.