Custom Forged Wheels for the Aston Martin DBS Superleggera (5x128)
ANKUSI forges custom wheels for the Aston Martin DBS Superleggera, drilled 5x128 with a 75.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 21x9J (model year 2021).
Recommended wheel sizes for the Aston Martin DBS Superleggera
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 21x9J | — |
| Flush | 21x9.5J | ET32 |
| Max | 22x10J | ET28 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Aston Martin DBS Superleggera
Forged wheels that can be drilled for the Aston Martin DBS Superleggera
Aston Martin OEM-Style Gloss Black 10 Y-Spoke Machined Face Forged Wheels – Aston Martin Virage / V8 Zagato Fitment (5-Lug)
Aston Martin OEM-Style Gloss Black 10 Y-Spoke Forged Wheels – Aston Martin Virage / V8 Zagato Fitment (5-Lug)
HRE P200-Style FF10 Metallic Gray Mesh Multi-Spoke Forged Wheels – BMW M3 CS Handschalter Fitment (19-21in, 5x112)
HRE P200-Style Gloss Black Mesh Multi-Spoke Forged Wheels – BMW M3 CS Handschalter Fitment (19-24in, 5x112)
Nissan 370Z / Toyota GR86 Forged Wheels – Bronze Double 5-Spoke (5-Lug)
BBS-Style Brushed Silver 10-Spoke Deep-Lip Forged Wheels – BMW M3 G80 / Porsche 911 Fitment (5-Lug)
Lexus RX / Toyota Highlander Forged Wheels – Gloss Black Split Y-Spoke Mesh (5-Lug)
ECC Gloss Black Cross-Spoke Forged Wheels - BMW M3 / Audi RS5 Fitment (5-Lug)Get a quote for Aston Martin DBS Superleggera wheels
Vehicles With the Same Hub as the Aston Martin DBS Superleggera (5x128, 75.1 mm Bore)
No other make in our database pairs 5x128 with a 75.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x128 is used by 1.2% of the vehicle entries in our database (78 of 6,503); 100.0% of those also use a 75.1 mm center bore.
Hub-Centric Rings for a 75.1 mm Center Bore
A wheel with a center bore larger than 75.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 75.1 mm |
| 78.1 mm | 78.1 → 75.1 mm |
| 84.1 mm | 84.1 → 75.1 mm |
| 93.1 mm | 93.1 → 75.1 mm |
ANKUSI forged wheels are bored to exactly 75.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Aston Martin DBS Superleggera take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 5x128 with a 75.1 mm center bore.
What is the factory wheel size of the Aston Martin DBS Superleggera?
The factory size in our database is 21x9J. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Aston Martin DBS Superleggera flush?
We recommend 21x9.5J ET32 for a flush fit and 22x10J ET28 as the maximum. Check clearance before ordering.