Volkswagen Vento Bolt Pattern, Center Bore & Wheel Offset (2014–2026)
Volkswagen Vento wheel fitment: 5x112 bolt pattern, 57.1mm center bore (2015–2026); 5x100 bolt pattern, 57.1mm center bore (2014–2023). OE wheel sizes and off
- 5x112bolt pattern (PCD), most common
- 57.1 mmcenter bore
- Boltwheel bolt / nut
- 7 guidesmodel years 2014–2026
Bolt pattern by generation
- 5x112, 57.1 mm center bore — 2015–2026 (4 variants)
- 5x100, 57.1 mm center bore — 2014–2023 (3 variants)
Volkswagen Vento wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Volkswagen Vento | 5x112 | 57.1 mm | 18x7.5J |
| 2024 | Volkswagen Vento | 5x112 | 57.1 mm | 18x7.5J |
| 2023 | Volkswagen Vento [IN] | 5x100 | 57.1 mm | 15x6J |
| 2018 | Volkswagen Vento | 5x112 | 57.1 mm | 17x7J |
| 2016 | Volkswagen Vento [IN] | 5x100 | 57.1 mm | 15x6J |
| 2015 | Volkswagen Vento | 5x112 | 57.1 mm | 15x6J |
| 2014 | Volkswagen Vento [IN] | 5x100 | 57.1 mm | 14x5J |
Factory wheel sizes on the Volkswagen Vento
Across the 7 Volkswagen Vento trims with a documented factory wheel, the OE diameter is 14-18 inch, width 5-7.5J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Volkswagen Vento (5x112)
Get a quote for Volkswagen Vento wheels
Vehicles With the Same Hub as the Volkswagen Vento (5x112, 57.1 mm Bore)
In our database, 360 other vehicle entries from 17 makes use exactly the same 5x112 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.9% of the vehicle entries in our database (1,403 of 6,396); 28.9% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Volkswagen Vento?
The Volkswagen Vento uses a 5x112 bolt pattern on most variants we cover with a 57.1mm center bore. Other generations use 5x100 / 57.1mm (2014–2023). Always check the exact year and trim before ordering.
What is the Volkswagen Vento center bore?
The hub-centric center bore is 57.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Volkswagen Vento years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Volkswagen Vento?
Any wheel drilled 5x112 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.