Toyota Verso-S Bolt Pattern, Center Bore & Wheel Offset (2012–2015)
Toyota Verso-S wheel fitment: 5x100 bolt pattern, 54.1mm center bore (2012–2015).
- 5x100bolt pattern (PCD)
- 54.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2012–2015
Toyota Verso-S wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2015 | Toyota Verso-S | 5x100 | 54.1 mm | 16x5.5J |
| 2012 | Toyota Verso-S | 5x100 | 54.1 mm | 16x5.5J |
Factory wheel sizes on the Toyota Verso-S
Across the 2 Toyota Verso-S trims with a documented factory wheel, the OE diameter is 16 inch, width 5.5J. A forged wheel that keeps the 5x100 bolt pattern and the 54.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Toyota Verso-S (5x100)
Shop all Toyota Verso-S forged wheels →
Get a quote for Toyota Verso-S wheels
Vehicles With the Same Hub as the Toyota Verso-S (5x100, 54.1 mm Bore)
In our database, 3 other vehicle entries from 3 makes use exactly the same 5x100 bolt pattern and 54.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 13.7% of those also use a 54.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x5.5J | ET39 | 4.79 in (122 mm) | — | — |
| Flush | 16x6.5J | ET35 | 5.13 in (130 mm) | +9 mm | +17 mm |
| Maximum | 17x7J | ET30 | 5.18 in (132 mm) | +10 mm | +28 mm |
Hub-Centric Rings for a 54.1 mm Center Bore
A wheel with a center bore larger than 54.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 56.1 mm | 56.1 → 54.1 mm |
| 57.1 mm | 57.1 → 54.1 mm |
| 60.1 mm | 60.1 → 54.1 mm |
| 63.4 mm | 63.4 → 54.1 mm |
| 73.1 mm | 73.1 → 54.1 mm |
ANKUSI forged wheels are bored to exactly 54.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Toyota Verso-S?
The Toyota Verso-S uses a 5x100 bolt pattern with a 54.1mm center bore across every Verso-S variant in our database (2 guides, 2012–2015).
What is the Toyota Verso-S center bore?
The hub-centric center bore is 54.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Verso-S years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Toyota Verso-S?
Any wheel drilled 5x100 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.



