Toyota Sienna Bolt Pattern, Center Bore & Wheel Offset (2011–2021)
Toyota Sienna wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2011–2021). OE wheel sizes and offsets for every Sienna variant we cover (3 guides), pl
- 5x114.3bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2011–2021
Toyota Sienna wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2021 | Toyota Sienna | 5x114.3 | 60.1 mm | 17x7.0J |
| 2018 | Toyota Sienna | 5x114.3 | 60.1 mm | 17x7.0J |
| 2011 | Toyota Sienna | 5x114.3 | 60.1 mm | 17x7.0J |
Forged wheels for the Toyota Sienna (5x114.3)
Get a quote for Toyota Sienna wheels
FAQ
What is the bolt pattern on a Toyota Sienna?
The Toyota Sienna uses a 5x114.3 bolt pattern with a 60.1mm center bore across every Sienna variant in our database (3 guides, 2011–2021).
What is the Toyota Sienna center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Sienna years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Toyota Sienna?
Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.