Toyota GR Corolla Bolt Pattern, Center Bore & Wheel Offset (2023–2026)

Toyota GR Corolla wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2023–2026).

  • 5x114.3bolt pattern (PCD)
  • 60.1 mmcenter bore
  • M12x1.5 Nutwheel bolt / nut
  • 2 guidesmodel years 2023–2026

Toyota GR Corolla wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2026Toyota GR Corolla5x114.360.1 mm18x8.5J
2023Toyota GR Corolla5x114.360.1 mm18x8.5J

Factory wheel sizes on the Toyota GR Corolla

Across the 2 Toyota GR Corolla trims with a documented factory wheel, the OE diameter is 18 inch, width 8.5J. A forged wheel that keeps the 5x114.3 bolt pattern and the 60.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Toyota GR Corolla (5x114.3)

Shop all Toyota GR Corolla forged wheels →

Get a quote for Toyota GR Corolla wheels

Vehicles With the Same Hub as the Toyota GR Corolla (5x114.3, 60.1 mm Bore)

In our database, 138 other vehicle entries from 18 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 16.8% of those also use a 60.1 mm center bore.

Offset and Backspacing: Factory Wheel vs Options

Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.

SetupSizeETBackspacingInward vs OEOutward vs OE
Factory (OE)18x8.5JET305.93 in (151 mm)——
Flush18x9.5JET256.23 in (158 mm)+8 mm+18 mm
Maximum19x9.5JET226.12 in (155 mm)+5 mm+21 mm

Hub-Centric Rings for a 60.1 mm Center Bore

A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
63.4 mm63.4 → 60.1 mm
64.1 mm64.1 → 60.1 mm
65.1 mm65.1 → 60.1 mm
66.1 mm66.1 → 60.1 mm
73.1 mm73.1 → 60.1 mm

ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Toyota GR Corolla?

The Toyota GR Corolla uses a 5x114.3 bolt pattern with a 60.1mm center bore across every GR Corolla variant in our database (2 guides, 2023–2026).

What is the Toyota GR Corolla center bore?

The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Toyota GR Corolla years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Toyota GR Corolla?

Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote