Skoda Citigo Bolt Pattern, Center Bore & Wheel Offset (2013–2017)
Skoda Citigo wheel fitment: 4x100 bolt pattern, 57.1mm center bore (2013–2017). OE wheel sizes and offsets for every Citigo variant we cover (2 guides), plus
- 4x100bolt pattern (PCD)
- 57.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2013–2017
Skoda Citigo wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2017 | Skoda Citigo | 4x100 | 57.1 mm | 14x5J ET35 |
| 2013 | Skoda Citigo 5-door | 4x100 | 57.1 mm | 14x5J ET35 |
Factory wheel sizes on the Skoda Citigo
Across the 2 Skoda Citigo trims with a documented factory wheel, the OE diameter is 14 inch, width 5J and offset ET35. A forged wheel that keeps the 4x100 bolt pattern and the 57.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Skoda Citigo (4x100)
Shop all Skoda Citigo forged wheels →
Get a quote for Skoda Citigo wheels
Vehicles With the Same Hub as the Skoda Citigo (4x100, 57.1 mm Bore)
In our database, 31 other vehicle entries from 6 makes use exactly the same 4x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.7% of the vehicle entries in our database (426 of 6,396); 8.9% of those also use a 57.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 14x5J | ET35 | 4.38 in (111 mm) | — | — |
| Flush | 15x6J | ET30 | 4.68 in (119 mm) | +8 mm | +18 mm |
| Maximum | 16x6.5J | ET25 | 4.73 in (120 mm) | +9 mm | +29 mm |
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Skoda Citigo?
The Skoda Citigo uses a 4x100 bolt pattern with a 57.1mm center bore across every Citigo variant in our database (2 guides, 2013–2017).
What is the Skoda Citigo center bore?
The hub-centric center bore is 57.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Skoda Citigo years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Skoda Citigo?
Any wheel drilled 4x100 with a 57.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.