Opel Corsa OPC Bolt Pattern, Center Bore & Wheel Offset (2011–2016)
Opel Corsa OPC wheel fitment: 5x110 bolt pattern, 65.1mm center bore (2011–2016). OE wheel sizes and offsets for every Corsa OPC variant we cover (2 guides),
- 5x110bolt pattern (PCD)
- 65.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2011–2016
Opel Corsa OPC wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2016 | Opel Corsa OPC | 5x110 | 65.1 mm | 18x7.5J ET44 |
| 2011 | Opel Corsa OPC Nurburgring Edition | 5x110 | 65.1 mm | 18x8J ET44 |
Factory wheel sizes on the Opel Corsa OPC
Across the 2 Opel Corsa OPC trims with a documented factory wheel, the OE diameter is 18 inch, width 7.5-8J and offset ET44. A forged wheel that keeps the 5x110 bolt pattern and the 65.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Opel Corsa OPC (5x110)
Shop all Opel Corsa OPC forged wheels →
Get a quote for Opel Corsa OPC wheels
Vehicles With the Same Hub as the Opel Corsa OPC (5x110, 65.1 mm Bore)
In our database, 119 other vehicle entries from 18 makes use exactly the same 5x110 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x110 is used by 2.2% of the vehicle entries in our database (145 of 6,503); 96.6% of those also use a 65.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x7.5J | ET44 | 5.98 in (152 mm) | — | — |
| Flush | 18x8.5J | ET35 | 6.13 in (156 mm) | +4 mm | +22 mm |
| Maximum | 19x8.5J | ET30 | 5.93 in (151 mm) | −1 mm | +27 mm |
Hub-Centric Rings for a 65.1 mm Center Bore
A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.1 mm | 66.1 → 65.1 mm |
| 66.6 mm | 66.6 → 65.1 mm |
| 67.1 mm | 67.1 → 65.1 mm |
| 70.1 mm | 70.1 → 65.1 mm |
| 73.1 mm | 73.1 → 65.1 mm |
ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Opel Corsa OPC?
The Opel Corsa OPC uses a 5x110 bolt pattern with a 65.1mm center bore across every Corsa OPC variant in our database (2 guides, 2011–2016).
What is the Opel Corsa OPC center bore?
The hub-centric center bore is 65.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Opel Corsa OPC years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Opel Corsa OPC?
Any wheel drilled 5x110 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.