Nissan Sentra SE-R Bolt Pattern, Center Bore & Wheel Offset (2004–2007)
Nissan Sentra SE-R wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore; 4x114.3 bolt pattern, 66.1mm center bore. OE wheel sizes and offsets for every Sen
- 5x114.3bolt pattern (PCD), most common
- 66.1 mmcenter bore
- M12x1.25 Nutwheel bolt / nut
- 2 guidesmodel years 2004–2007
Bolt pattern by generation
- 5x114.3, 66.1 mm center bore — 2007 (1 variants)
- 4x114.3, 66.1 mm center bore — 2004 (1 variants)
Nissan Sentra SE-R wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2007 | Nissan Sentra SE-R | 5x114.3 | 66.1 mm | 17x7.0J |
| 2004 | Nissan Sentra SE-R | 4x114.3 | 66.1 mm | 17x7.0J |
Forged wheels for the Nissan Sentra SE-R (5x114.3)
Get a quote for Nissan Sentra SE-R wheels
FAQ
What is the bolt pattern on a Nissan Sentra SE-R?
The Nissan Sentra SE-R uses a 5x114.3 bolt pattern on most variants we cover with a 66.1mm center bore. Other generations use 4x114.3 / 66.1mm (2004–2004). Always check the exact year and trim before ordering.
What is the Nissan Sentra SE-R center bore?
The hub-centric center bore is 66.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Nissan Sentra SE-R years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Nissan Sentra SE-R?
Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.