Nissan Pathfinder Rock Bolt Pattern, Center Bore & Wheel Offset (2019–2023)

Nissan Pathfinder Rock wheel fitment: 5x114.3 bolt pattern, 66.1mm center bore (2019–2023).

  • 5x114.3bolt pattern (PCD)
  • 66.1 mmcenter bore
  • M12x1.25 Nutwheel bolt / nut
  • 2 guidesmodel years 2019–2023

Nissan Pathfinder Rock wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2023Nissan Pathfinder Rock Creek5x114.366.1 mm18x8.0J
2019Nissan Pathfinder Rock Creek Edition5x114.366.1 mm18x7.5J

Factory wheel sizes on the Nissan Pathfinder Rock

Across the 2 Nissan Pathfinder Rock trims with a documented factory wheel, the OE diameter is 18 inch, width 7.5-8J. A forged wheel that keeps the 5x114.3 bolt pattern and the 66.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Nissan Pathfinder Rock (5x114.3)

Shop all Nissan Pathfinder Rock forged wheels →

Get a quote for Nissan Pathfinder Rock wheels

Vehicles With the Same Hub as the Nissan Pathfinder Rock (5x114.3, 66.1 mm Bore)

In our database, 118 other vehicle entries from 8 makes use exactly the same 5x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 17.3% of those also use a 66.1 mm center bore.

Offset and Backspacing: Factory Wheel vs Options

Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.

SetupSizeETBackspacingInward vs OEOutward vs OE
Factory (OE)18x8JET355.88 in (149 mm)——
Flush18x9JET205.79 in (147 mm)−2 mm+28 mm
Maximum20x9JET155.59 in (142 mm)−7 mm+33 mm

Hub-Centric Rings for a 66.1 mm Center Bore

A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
66.6 mm66.6 → 66.1 mm
67.1 mm67.1 → 66.1 mm
70.1 mm70.1 → 66.1 mm
70.5 mm70.5 → 66.1 mm
73.1 mm73.1 → 66.1 mm

ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Nissan Pathfinder Rock?

The Nissan Pathfinder Rock uses a 5x114.3 bolt pattern with a 66.1mm center bore across every Pathfinder Rock variant in our database (2 guides, 2019–2023).

What is the Nissan Pathfinder Rock center bore?

The hub-centric center bore is 66.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Nissan Pathfinder Rock years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Nissan Pathfinder Rock?

Any wheel drilled 5x114.3 with a 66.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote