Gloss Black 6 Y-Spoke Forged Wheels
Li Auto L9 / L8 Fitment
Li Auto Wheel Fitment Guide
11 fitment guides for Li Auto, covering 2022 to 2027, built around the 5x120 bolt pattern. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Li Auto Bolt Pattern & Center Bore Notes
Every Li Auto model we currently cover uses the same 5x120 bolt pattern with a 62.5mm center bore. As we add more Li Auto model years to this guide we will flag any generation that changes this here — always double-check the specific model page below since older or international-market versions can differ.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Li Auto model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Li Auto
The most common Li Auto fitment in our guide is 5x120 with a 62.5 mm center bore (11 of 11 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x120 that distance is 70.5 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
L9 (6)
2022 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2023 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2024 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2025 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2026 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2027 Li Auto L9 Wheels: 5x120 Bolt Pattern, Offset & Rim Size
L7 (5)
2023 Li Auto L7 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2024 Li Auto L7 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2025 Li Auto L7 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2026 Li Auto L7 Wheels: 5x120 Bolt Pattern, Offset & Rim Size2027 Li Auto L7 Wheels: 5x120 Bolt Pattern, Offset & Rim Size
Forged Wheels for Li Auto
Forged-to-order wheel designs matched to Li Auto bolt patterns. Every set is machined to your exact model, offset and center bore.
Gloss Black Directional Machined Face Forged Wheels
NIO ET7 / Li Auto L9 Fitment
Brushed Silver Turbine Forged Wheels
Li Auto L9 / L8 Fitment
Gloss White Full-Face Forged Wheels
Li Auto L9 / L8 Fitment
Brushed Silver Slotted Dish Forged Wheels
Li Auto L9 / L8 Fitment
Matte Light Gunmetal 10 Y-Spoke Forged Wheels
Li Auto L9 / L8 Fitment
Gloss White Petal-Spoke Forged Wheels
Li Auto L9 / L8 Fitment
Gunmetal Multi-Spoke Turbine Forged Wheels
Li Auto L9 / L8 Fitment · 5-Lug
Vehicles Using 5x120 With a 62.5 mm Center Bore
In our database, 1 other NIO entries use exactly the same 5x120 bolt pattern and 62.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 0.4% of those also use a 62.5 mm center bore.
Hub-Centric Rings for a 62.5 mm Center Bore
A wheel with a center bore larger than 62.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 62.5 mm |
| 64.1 mm | 64.1 → 62.5 mm |
| 65.1 mm | 65.1 → 62.5 mm |
| 66.1 mm | 66.1 → 62.5 mm |
| 73.1 mm | 73.1 → 62.5 mm |
ANKUSI forged wheels are bored to exactly 62.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.