Lexus RX Bolt Pattern, Center Bore & Wheel Offset (2016–2023)
Lexus RX wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2016–2023).
- 5x114.3bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 7 guidesmodel years 2016–2023
Lexus RX wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2023 | Lexus RX (US) | 5x114.3 | 60.1 mm | 19x8J ET40 |
| 2023 | RX (US) | 5x114.3 | 60.1 mm | 19x8.0J ET40 |
| 2020 | Lexus RX L | 5x114.3 | 60.1 mm | 18x8J ET30 |
| 2016 | Lexus RX 350 | 5x114.3 | 60.1 mm | 18x8J ET30 |
| 2016 | Lexus RX 350 F Sport | 5x114.3 | 60.1 mm | 20x8J ET30 |
| 2016 | Lexus RX 450h | 5x114.3 | 60.1 mm | 18x8J ET30 |
| 2016 | Lexus RX 450h F Sport | 5x114.3 | 60.1 mm | 20x8J ET30 |
Factory wheel sizes on the Lexus RX
Across the 7 Lexus RX trims with a documented factory wheel, the OE diameter is 18-20 inch, width 8J and offset ET30-40. A forged wheel that keeps the 5x114.3 bolt pattern and the 60.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 10 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Lexus RX (5x114.3)
Shop all Lexus RX forged wheels →
Get a quote for Lexus RX wheels
Vehicles With the Same Hub as the Lexus RX (5x114.3, 60.1 mm Bore)
In our database, 154 other vehicle entries from 18 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 16.8% of those also use a 60.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8J | ET40 | 6.07 in (154 mm) | — | — |
| Flush | 21x9J | ET30 | 6.18 in (157 mm) | +3 mm | +23 mm |
| Maximum | 22x9.5J | ET25 | 6.23 in (158 mm) | +4 mm | +34 mm |
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Lexus RX?
The Lexus RX uses a 5x114.3 bolt pattern with a 60.1mm center bore across every RX variant in our database (7 guides, 2016–2023).
What is the Lexus RX center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Lexus RX years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Lexus RX?
Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.