Kia Niro Bolt Pattern, Center Bore & Wheel Offset (2017–2027)

Kia Niro wheel fitment: 5x114.3 bolt pattern, 67.1mm center bore (2017–2027).

  • 5x114.3bolt pattern (PCD)
  • 67.1 mmcenter bore
  • M12x1.5 Nutwheel bolt / nut
  • 7 guidesmodel years 2017–2027

Kia Niro wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2027Kia Niro5x114.367.1 mm18x7.5J ET45
2023Kia Niro5x114.367.1 mm18x7.5J
2023Kia Niro (EU)5x114.367.1 mm18x7.5J
2020Kia Niro Hybrid5x114.367.1 mm18x7.5J
2018Kia Niro Plug-In Hybrid5x114.367.1 mm16x6.5J
2017Kia Niro5x114.367.1 mm18x7.5J
2017Kia Niro (EU)5x114.367.1 mm18x7.5J

Factory wheel sizes on the Kia Niro

Across the 7 Kia Niro trims with a documented factory wheel, the OE diameter is 16-18 inch, width 6.5-7.5J and offset ET45. A forged wheel that keeps the 5x114.3 bolt pattern and the 67.1 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Kia Niro (5x114.3)

Shop all Kia Niro forged wheels →

Get a quote for Kia Niro wheels

Vehicles With the Same Hub as the Kia Niro (5x114.3, 67.1 mm Bore)

In our database, 364 other vehicle entries from 29 makes use exactly the same 5x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 35.2% of those also use a 67.1 mm center bore.

Offset and Backspacing: Factory Wheel vs Options

Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.

SetupSizeETBackspacingInward vs OEOutward vs OE
Factory (OE)18x7.5JET456.02 in (153 mm)——
Maximum20x8.5JET356.13 in (156 mm)+3 mm+23 mm

Hub-Centric Rings for a 67.1 mm Center Bore

A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
70.1 mm70.1 → 67.1 mm
70.5 mm70.5 → 67.1 mm
71.6 mm71.6 → 67.1 mm
72.6 mm72.6 → 67.1 mm
73.1 mm73.1 → 67.1 mm

ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Kia Niro?

The Kia Niro uses a 5x114.3 bolt pattern with a 67.1mm center bore across every Niro variant in our database (7 guides, 2017–2027).

What is the Kia Niro center bore?

The hub-centric center bore is 67.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Kia Niro years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Kia Niro?

Any wheel drilled 5x114.3 with a 67.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote