Jetour T2 Bolt Pattern, Center Bore & Wheel Offset (2024–2025)
Jetour T2 wheel fitment: 5x108 bolt pattern, 60.1mm center bore (2024–2025).
- 5x108bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2024–2025
Jetour T2 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Jetour T2 | 5x108 | 60.1 mm | 20x8J |
| 2024 | Jetour T2 | 5x108 | 60.1 mm | 20x8J |
Factory wheel sizes on the Jetour T2
Across the 2 Jetour T2 trims with a documented factory wheel, the OE diameter is 20 inch, width 8J. A forged wheel that keeps the 5x108 bolt pattern and the 60.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Jetour T2 (5x108)
Get a quote for Jetour T2 wheels
Vehicles With the Same Hub as the Jetour T2 (5x108, 60.1 mm Bore)
In our database, 57 other vehicle entries from 10 makes use exactly the same 5x108 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 12.4% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Jetour T2?
The Jetour T2 uses a 5x108 bolt pattern with a 60.1mm center bore across every T2 variant in our database (2 guides, 2024–2025).
What is the Jetour T2 center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Jetour T2 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Jetour T2?
Any wheel drilled 5x108 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.