HSV ClubSport Bolt Pattern, Center Bore & Wheel Offset (2008–2015)
HSV ClubSport wheel fitment: 5x120 bolt pattern, 66.9mm center bore (2008–2015). OE wheel sizes and offsets for every ClubSport variant we cover (2 guides), p
- 5x120bolt pattern (PCD)
- 66.9 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2008–2015
HSV ClubSport wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2015 | HSV ClubSport R8 25th Anniversary | 5x120 | 66.9 mm | — |
| 2008 | HSV ClubSport R8 Tourer | 5x120 | 66.9 mm | — |
Forged wheels for the HSV ClubSport (5x120)
Shop all HSV ClubSport forged wheels →
Get a quote for HSV ClubSport wheels
Vehicles With the Same Hub as the HSV ClubSport (5x120, 66.9 mm Bore)
In our database, 131 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 66.9 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.2% of the vehicle entries in our database (666 of 6,503); 24.2% of those also use a 66.9 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET36 | 6.17 in (157 mm) | — | — |
| Flush | 20x9J | ET28 | 6.10 in (155 mm) | −2 mm | +14 mm |
| Maximum | 20x9.5J | ET25 | 6.23 in (158 mm) | +2 mm | +24 mm |
Hub-Centric Rings for a 66.9 mm Center Bore
A wheel with a center bore larger than 66.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.9 mm |
| 70.1 mm | 70.1 → 66.9 mm |
| 70.5 mm | 70.5 → 66.9 mm |
| 71.6 mm | 71.6 → 66.9 mm |
| 73.1 mm | 73.1 → 66.9 mm |
ANKUSI forged wheels are bored to exactly 66.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a HSV ClubSport?
The HSV ClubSport uses a 5x120 bolt pattern with a 66.9mm center bore across every ClubSport variant in our database (2 guides, 2008–2015).
What is the HSV ClubSport center bore?
The hub-centric center bore is 66.9 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all HSV ClubSport years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the HSV ClubSport?
Any wheel drilled 5x120 with a 66.9mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.