Geely MK Bolt Pattern, Center Bore & Wheel Offset (2006–2019)
Geely MK wheel fitment: 4x100 bolt pattern, 54.1mm center bore (2006–2019). OE wheel sizes and offsets for every MK variant we cover (14 guides), plus flush a
- 4x100bolt pattern (PCD)
- 54.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 14 guidesmodel years 2006–2019
Geely MK wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2019 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2018 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2017 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2016 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2015 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2014 | Geely MK Facelift | 4x100 | 54.1 mm | 15x6J |
| 2013 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2012 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2011 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2010 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2009 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2008 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2007 | Geely MK | 4x100 | 54.1 mm | 15x6J |
| 2006 | Geely MK | 4x100 | 54.1 mm | 15x6J |
Forged wheels for the Geely MK (4x100)
Get a quote for Geely MK wheels
FAQ
What is the bolt pattern on a Geely MK?
The Geely MK uses a 4x100 bolt pattern with a 54.1mm center bore across every MK variant in our database (14 guides, 2006–2019).
What is the Geely MK center bore?
The hub-centric center bore is 54.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Geely MK years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Geely MK?
Any wheel drilled 4x100 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.



