Geely Icon BMA Bolt Pattern, Center Bore & Wheel Offset (2020–2025)

Geely Icon BMA wheel fitment: 5x114.3 bolt pattern, 54.1mm center bore (2020–2025).

  • 5x114.3bolt pattern (PCD)
  • 54.1 mmcenter bore
  • M12x1.5 Nutwheel bolt / nut
  • 6 guidesmodel years 2020–2025

Geely Icon BMA wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2025Geely Icon BMA5x114.354.1 mm19x7.5J
2024Geely Icon BMA5x114.354.1 mm19x7.5J
2023Geely Icon BMA5x114.354.1 mm19x7.5J
2022Geely Icon BMA5x114.354.1 mm19x7.5J
2021Geely Icon BMA5x114.354.1 mm19x7.5J
2020Geely Icon BMA5x114.354.1 mm19x7.5J

Factory wheel sizes on the Geely Icon BMA

Across the 6 Geely Icon BMA trims with a documented factory wheel, the OE diameter is 19 inch, width 7.5J. A forged wheel that keeps the 5x114.3 bolt pattern and the 54.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Geely Icon BMA (5x114.3)

Get a quote for Geely Icon BMA wheels

Vehicles With the Same Hub as the Geely Icon BMA (5x114.3, 54.1 mm Bore)

In our database, 4 other vehicle entries from 3 makes use exactly the same 5x114.3 bolt pattern and 54.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 3.2% of those also use a 54.1 mm center bore.

Hub-Centric Rings for a 54.1 mm Center Bore

A wheel with a center bore larger than 54.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
56.1 mm56.1 → 54.1 mm
57.1 mm57.1 → 54.1 mm
60.1 mm60.1 → 54.1 mm
63.4 mm63.4 → 54.1 mm
73.1 mm73.1 → 54.1 mm

ANKUSI forged wheels are bored to exactly 54.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Geely Icon BMA?

The Geely Icon BMA uses a 5x114.3 bolt pattern with a 54.1mm center bore across every Icon BMA variant in our database (6 guides, 2020–2025).

What is the Geely Icon BMA center bore?

The hub-centric center bore is 54.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Geely Icon BMA years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Geely Icon BMA?

Any wheel drilled 5x114.3 with a 54.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote