Ford F-Series Super Duty Bolt Pattern, Center Bore & Wheel Offset (2017–2023)
Ford F-Series Super Duty wheel fitment: 8x170 bolt pattern, 124.9mm center bore (2017–2023). OE wheel sizes and offsets for every F-Series Super Duty variant
- 8x170bolt pattern (PCD)
- 124.9 mmcenter bore
- M14x2 Nutwheel bolt / nut
- 5 guidesmodel years 2017–2023
Ford F-Series Super Duty wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2023 | Ford F-Series Super Duty | 8x170 | 124.9 mm | 20x8.0J |
| 2022 | Ford F-Series Super Duty | 8x170 | 124.9 mm | 20x8.0J |
| 2020 | Ford F-Series Super Duty | 8x170 | 124.9 mm | 20x8.0J |
| 2020 | Ford F-Series Super Duty Tremor | 8x170 | 124.9 mm | 18x8.0J |
| 2017 | Ford F-Series Super Duty | 8x170 | 124.9 mm | 20x8.0J |
Factory wheel sizes on the Ford F-Series Super Duty
Across the 5 Ford F-Series Super Duty trims with a documented factory wheel, the OE diameter is 18-20 inch, width 8J. A forged wheel that keeps the 8x170 bolt pattern and the 124.9 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Ford F-Series Super Duty (8x170)
Shop all Ford F-Series Super Duty forged wheels →
Get a quote for Ford F-Series Super Duty wheels
Vehicles With the Same Hub as the Ford F-Series Super Duty (8x170, 124.9 mm Bore)
No other make in our database pairs 8x170 with a 124.9 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
8x170 is used by 0.1% of the vehicle entries in our database (7 of 6,396); 100.0% of those also use a 124.9 mm center bore.
Hub-Centric Rings for a 124.9 mm Center Bore
A wheel with a center bore larger than 124.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 124.9 mm |
ANKUSI forged wheels are bored to exactly 124.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Ford F-Series Super Duty?
The Ford F-Series Super Duty uses a 8x170 bolt pattern with a 124.9mm center bore across every F-Series Super Duty variant in our database (5 guides, 2017–2023).
What is the Ford F-Series Super Duty center bore?
The hub-centric center bore is 124.9 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Ford F-Series Super Duty years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Ford F-Series Super Duty?
Any wheel drilled 8x170 with a 124.9mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.