Silver / Machined Split-Spoke Machined Face Forged Wheels
Denza D9 / Mercedes-Benz E-Class Fitment
Denza Wheel Fitment Guide
1 fitment guide for Denza, covering the 2025 model year, built around the 5x120 bolt pattern. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Denza Bolt Pattern & Center Bore Notes
Every Denza model we currently cover uses the same 5x120 bolt pattern with a 63.4mm center bore. As we add more Denza model years to this guide we will flag any generation that changes this here — always double-check the specific model page below since older or international-market versions can differ.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Denza model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Denza
The most common Denza fitment in our guide is 5x120 with a 63.4 mm center bore (1 of 1 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 5x120 that distance is 70.5 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged Wheels for Denza
Forged-to-order wheel designs matched to Denza bolt patterns. Every set is machined to your exact model, offset and center bore.
Vehicles Using 5x120 With a 63.4 mm Center Bore
No other make in our database pairs 5x120 with a 63.4 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 0.1% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.