Daewoo Wheel Fitment Guide
14 fitment guides for Daewoo, covering 2000 to 2016, spanning 4x100, 4x114.3 and 5x114.3 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Daewoo Bolt Pattern & Center Bore Notes
Based on the 14 Daewoo fitment guides we cover, we have documented 3 distinct bolt pattern / center bore combinations across different Daewoo platforms and model years:
- 4x100 bolt pattern, 56.6mm center bore — 7 models we cover, spanning 2005–2011.
- 4x114.3 bolt pattern, 56.6mm center bore — 5 models we cover, spanning 2004–2016.
- 5x114.3 bolt pattern, 56.6mm center bore — 2 models we cover, spanning 2000–2002.
Do not mix platforms: a wheel forged for one Daewoo bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Daewoo model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Daewoo
The most common Daewoo fitment in our guide is 4x100 with a 56.6 mm center bore (7 of 14 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 4x100 that distance is 70.7 mm (PCD × sin(180° / 4)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
4x100 / 56.6mm center bore
Gentra (2)
Kalos (2)
Lanos (2)
4x114.3 / 56.6mm center bore
Lacetti (2)
Gentra (2)
5x114.3 / 56.6mm center bore
Vehicles Using 4x100 With a 56.6 mm Center Bore
In our database, 55 other vehicle entries from 6 makes use exactly the same 4x100 bolt pattern and 56.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x100 is used by 6.9% of the vehicle pages in our English fitment guide (451 of 6,503); 13.1% of those also use a 56.6 mm center bore.
Hub-Centric Rings for a 56.6 mm Center Bore
A wheel with a center bore larger than 56.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 57.1 mm | 57.1 → 56.6 mm |
| 60.1 mm | 60.1 → 56.6 mm |
| 63.4 mm | 63.4 → 56.6 mm |
| 64.1 mm | 64.1 → 56.6 mm |
| 73.1 mm | 73.1 → 56.6 mm |
ANKUSI forged wheels are bored to exactly 56.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.