Citroen C3 Bolt Pattern, Center Bore & Wheel Offset (2006–2020)

Citroen C3 wheel fitment: 4x108 bolt pattern, 65.1mm center bore (2006–2020).

  • 4x108bolt pattern (PCD)
  • 65.1 mmcenter bore
  • M12x1.25 Boltwheel bolt / nut
  • 5 guidesmodel years 2006–2020

Citroen C3 wheel specs by year and trim

YearModel / trimBolt patternCenter boreOE wheel
2020Citroen C34x10865.1 mm16x6.5J
2017Citroen C34x10865.1 mm16x6.5J
2014Citroen C34x10865.1 mm16x6.0J
2010Citroen C34x10865.1 mm16x6.0J
2006Citroen C34x10865.1 mm15x6.0J

Factory wheel sizes on the Citroen C3

Across the 5 Citroen C3 trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6-6.5J. A forged wheel that keeps the 4x108 bolt pattern and the 65.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.

Forged wheels for the Citroen C3 (4x108)

Shop all Citroen C3 forged wheels →

Get a quote for Citroen C3 wheels

Vehicles With the Same Hub as the Citroen C3 (4x108, 65.1 mm Bore)

In our database, 80 other vehicle entries from 10 makes use exactly the same 4x108 bolt pattern and 65.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

4x108 is used by 2.6% of the vehicle pages in our English fitment guide (171 of 6,503); 72.5% of those also use a 65.1 mm center bore.

Hub-Centric Rings for a 65.1 mm Center Bore

A wheel with a center bore larger than 65.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
66.1 mm66.1 → 65.1 mm
66.6 mm66.6 → 65.1 mm
67.1 mm67.1 → 65.1 mm
70.1 mm70.1 → 65.1 mm
73.1 mm73.1 → 65.1 mm

ANKUSI forged wheels are bored to exactly 65.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

FAQ

What is the bolt pattern on a Citroen C3?

The Citroen C3 uses a 4x108 bolt pattern with a 65.1mm center bore across every C3 variant in our database (5 guides, 2006–2020).

What is the Citroen C3 center bore?

The hub-centric center bore is 65.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.

Do all Citroen C3 years share the same wheel fitment?

The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.

Which forged wheels fit the Citroen C3?

Any wheel drilled 4x108 with a 65.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.

Contact WhatsApp Get a Quote