Cadillac Seville STS Bolt Pattern, Center Bore & Wheel Offset (2000–2002)
Cadillac Seville STS wheel fitment: 5x115 bolt pattern, 70.3mm center bore (2000–2002). OE wheel sizes and offsets for every Seville STS variant we cover (2 g
- 5x115bolt pattern (PCD)
- 70.3 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2000–2002
Cadillac Seville STS wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2002 | Cadillac Seville STS | 5x115 | 70.3 mm | 16x7J ET51 |
| 2000 | Cadillac Seville STS | 5x115 | 70.3 mm | 16x7.0J |
Factory wheel sizes on the Cadillac Seville STS
Across the 2 Cadillac Seville STS trims with a documented factory wheel, the OE diameter is 16 inch, width 7J and offset ET51. A forged wheel that keeps the 5x115 bolt pattern and the 70.3 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Cadillac Seville STS (5x115)
Shop all Cadillac Seville STS forged wheels →
Get a quote for Cadillac Seville STS wheels
Vehicles With the Same Hub as the Cadillac Seville STS (5x115, 70.3 mm Bore)
In our database, 110 other vehicle entries from 8 makes use exactly the same 5x115 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x115 is used by 3.2% of the vehicle pages in our English fitment guide (209 of 6,503); 65.1% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cadillac Seville STS?
The Cadillac Seville STS uses a 5x115 bolt pattern with a 70.3mm center bore across every Seville STS variant in our database (2 guides, 2000–2002).
What is the Cadillac Seville STS center bore?
The hub-centric center bore is 70.3 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cadillac Seville STS years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Cadillac Seville STS?
Any wheel drilled 5x115 with a 70.3mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.